7,241
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + − + + + Line 36:
Line 38: − + − <br />+ − <br /> − − =Adjustment with StudioXm= −
Importing a new version from external source
{{TOC_MBPlusV5}}
{{DISPLAYTITLE:PARAMETER MENU A - Quick Trim|noerror}}
{{DISPLAYTITLE:Quick Trim|noerror}}
{{TOC_MBPlusV5|Manuals:MBPlusFblV5:Governormenu_F/en|Manuals:MBPlusFblV5:ControlStyle/en|PARAMETERMENU}}
__TOC__
<br />
The first menu point of the PARAMETER MENU gives you the possibility to quickly adjust swashplate and rudder trim on the flying field. This may be neccessary when your helicopter slowly drifts in hovering flight or when it doesn’t climb out straight on sudden collective pitch inputs. Additionaly when using the AttitudeControl feature (only included in PROEDITION firmware upgrade) you may trim the reference point of the artificial horizon in case the heli does not level perfectly when AttitudeControl stabilization is active.<br />
The first menu point of the PARAMETER MENU gives you the possibility to quickly adjust swashplate and rudder trim on the flying field. This may be neccessary when your helicopter slowly drifts in hovering flight or when it doesn’t climb out straight on sudden collective pitch inputs. Additionaly when using the AttitudeControl feature (only included in PROEDITION firmware upgrade) you may trim the reference point of the artificial horizon in case the heli does not level perfectly when AttitudeControl stabilization is active.<br />
<br />
<br />
<br />
<br />
=Adjustment with StudioX=
=Adjustment with StudioX=
When StudioX has connected to your MICROBEAST PLUS, in the device overview main screen click the "Parameter" button. The topic "Quick Trim" provides adjustment buttons to change the trim values for aileron, elevator, rudder and also collective. Positive values indicate the directions right, forward or up. Negative values indicate left, backwards or down. Please note that the first screen "Quick trim" has global effect, meaning that the values set here are used in all of the Paramter Banks (in case you're using the Bank Switching feature). Separate trimming for each bank is not provided.<br />
<br />
<br />
On the bottom of the screen you can see the trimming for the Artificial Horizon. Here you can trim the tilt on the roll and pitch axis in steps of 0.5 degrees. Please read the notes above for more information about this feature.<br />
<br />
<br />
<br />
<br />
<br />