Changes

__NOTOC__

__NOTOC__

{{TOC_MBPlusV5}}

{{TOC_MBPlusV5|Manuals:MBPlusFblV5:Hardware_Installation/en|Manuals:MBPlusFblV5:ReceiverType/en}}

{{DISPLAYTITLE:Radio system|noerror}}

{{DISPLAYTITLE:Radio system|noerror}}

__TOC__

__TOC__

</p>

</p>

{{QUOTE|[[File:Warning.png|18px|sub]] '''Make sure that the motor in electric models can not start when doing the adjustment work!''' If the drive battery is used as power supply for receiver, servos and MICROBEAST PLUS disconnect the motor from the ESC.}}<br />

{{QUOTE|[[File:Warning.png|18px|sub]] '''Make sure that the motor in electric models can not start when doing the adjustment work!''' If the drive battery is used as power supply for receiver, servos and MICROBEAST PLUS disconnect the motor from the ESC.}}<br />

<br />

<br />

==Standard receiver==

==Standard receiver==

A conventional receiver with multiple servo output connectors is what we consider a "Standard receiver". Here you connect each servo output to one specific control function at the MICROBEAST PLUS using one connection wire for each function. You have these 5 input functions (wires): Aileron, Elevator, Rudder, Collective pitch and gyro gain. Simply connect each wire to the corresponding channel output port at the receiver which you like to use for the specific function. If you don't know which stick controls which channel have a look at your radio's servo monitor, refer to your radios instruction manual or simply connect a servo to each channel testwise!<br >

A conventional receiver with multiple servo output connectors is what we consider a "Standard receiver". Here you connect each servo output to one specific control function at the MICROBEAST PLUS using one connection wire for each function. You have these 5 input functions (wires): Aileron, Elevator, Rudder, Collective pitch and gyro gain. Simply connect each wire to the corresponding channel output port at the receiver which you like to use for the specific function. If you don't know which stick controls which channel have a look at your radio's servo monitor, refer to your radios instruction manual or simply connect a servo to each channel testwise!<br />

<br />

<br />

{|cellspacing = "20"

{|cellspacing = "20"

|style="text-align:center;"| [[Image:Standard_RX.png|250px]]

|style="text-align:center;"| [[Image:Standard_RX.png|250px]]

|}<br >

|}<br />

Here we show connection layouts for two common radio brands. Note that this is only exemplary, the channel output of your transmitter can by different even when using a radio of this brand. And you can use any other radio system on the market together with MICROBEAST PLUS when using the servo output channels of the receiver, not only these two brands!

Here we show connection layouts for two common radio brands. Note that this is only exemplary, the channel output of your transmitter can by different even when using a radio of this brand. And you can use any other radio system on the market together with MICROBEAST PLUS when using the servo output channels of the receiver, not only these two brands!

{|cellspacing = "20"

{|cellspacing = "20"

|[[Image:Spektrum_RX.png|x100px]]

|[[Image:Spektrum_RX.png|x100px]]

|[[Image:Futaba_RX.png|x100px]]

|[[Image:Futaba_RX.png|x100px]]

|}<br >

|}<br />

{{QUOTE|

{{QUOTE|

* The wires for rudder, pitch and gyro are signal wires. They must be placed on the same receiver side as the the both orange wires from aileron and elevator!

* The wires for rudder, pitch and gyro are signal wires. They must be placed on the same receiver side as the the both orange wires from aileron and elevator!

<br />

<br />

'''When using a big heli with standard size servos it may be insufficient to only provide power at the [SYS] port or receiver.''' Note when only connecting power at the receiver, all the current has to flow over one thin wire to the servos! If there are no other ports left to (additionally) feed in power, we highly recommend using the MICROBEAST PLUS HD which has an additional high power input to reduce wiring resistance and to serve todays demands for a robust servo power supply.

'''When using a big heli with standard size servos it may be insufficient to only provide power at the [SYS] port or receiver.''' Note when only connecting power at the receiver, all the current has to flow over one thin wire to the servos! If there are no other ports left to (additionally) feed in power, we highly recommend using the MICROBEAST PLUS HD which has an additional high power input to reduce wiring resistance and to serve todays demands for a robust servo power supply.<br />

==Spektrum® DSM/JR® DMSS remote satellite==

==Spektrum® DSM/JR® DMSS remote satellite==