Changes

<div class="iosgallery">

<div class="iosgallery">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20011.PNG">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20011.PNG">

<div>Click scan button...</div>

<div class="iostext">Click scan button...</div>

</div>

</div>

<div class="iosgallery">

<div class="iosgallery">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20014.PNG">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20014.PNG">

<div>...and wait until scan is finished</div>

<div class="iostext">...and wait until scan is finished</div>

</div>

</div>

<div class="iosgallery">

<div class="iosgallery">

<div class="iosgallery">

<div class="iosgallery">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20017.PNG">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20017.PNG">

<div>At first move the stick for collective. Make sure only one channel is moved on the radio otherwise MICROBEAST PLUS is not able to detect the movement!</div>

<div class="iostext">At first move the stick for collective. Make sure only one channel is moved on the radio otherwise MICROBEAST PLUS is not able to detect the movement!</div>

</div>

</div>

<div class="iosgallery">

<div class="iosgallery">

<div class="iosgallery">

<div class="iosgallery">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20022.PNG">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20022.PNG">

<div class="iostext">The optional functions can be skipped if not needed. See text above!</div>

<div class="iostext">The optional functions can be skipped if not needed. See text below!</div>

</div>

</div>

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20023.PNG">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20023.PNG">

<div class="iostext">When skipping the channel number will be shown as <b>-</b></div>

<div class="iostext">When skipping the channel number will be shown as <b>-</b></div>

* Likewise, the assignment of the channel for internal governor can be skipped in case it is not needed or if you don‘t want to control the governor with a separate channel, e. g. if your transmitter does not provide enough free channels. By skipping the assignment the internal governor function will use a different operating mode that allows to control it by the throttle channel if you like. When used in an electric model the internal governor is controlled by the throttle channel in general. In this case the assignment can be skipped anyway, as it will have no effect.

* Likewise, the assignment of the channel for internal governor can be skipped in case it is not needed or if you don‘t want to control the governor with a separate channel, e. g. if your transmitter does not provide enough free channels. By skipping the assignment the internal governor function will use a different operating mode that allows to control it by the throttle channel if you like. When used in an electric model the internal governor is controlled by the throttle channel in general. In this case the assignment can be skipped anyway, as it will have no effect.

* Finally, you can assign the channel that is used to engage the AttitudeControl/rescue stabilization (only available you've installed the PROEDITION Upgrade on your device). Again this can be skipped if not needed or if you don‘t want to use a separate channel or in case you have no more free channels left). AttitudeControl can still be used then. In this case the channel for the tail gyro gain is used to engage AttitudeControl or can be enabled separately using the Bank Switch feature. Please see the section about using AttitudeControl for further details.</p>

* Finally, you can assign the channel that is used to engage the AttitudeControl/rescue stabilization (only available you've installed the PROEDITION Upgrade on your device). Again this can be skipped if not needed or if you don‘t want to use a separate channel or in case you have no more free channels left). AttitudeControl can still be used then. In this case the channel for the tail gyro gain is used to engage AttitudeControl or can be enabled separately using the Bank Switch feature. Please see the section about using AttitudeControl for further details.</p>

<br />

<br />

{{QUOTE|If the Status-LED lights in '''red color''' this means either there is no valid remote control signal available or that you did try to assign two or more channels to a function. So check if the receiver is connected and powered properly and that you're only moving one channel at a time when trying to do the manual function assignment.}}<br />

{{QUOTE|If the Status-LED lights in '''red color''' this means either there is no valid remote control signal available or that you did try to assign two or more channels to a function. So check if the receiver is connected and powered properly and that you're only moving one channel at a time when trying to do the manual function assignment.}}<br />

To teach the failsafe position choose "Proceed" when asked to teach the failsafe position and set the throttle channel on your remote control to the desired position. Then press '''Set''' to save the position. If you did not connect a function to CH5 Output and don't need throttle failsafe, press '''Cancel''' to complete setup!<br />

To teach the failsafe position choose "Proceed" when asked to teach the failsafe position and set the throttle channel on your remote control to the desired position. Then press '''Set''' to save the position. If you did not connect a function to CH5 Output and don't need throttle failsafe, press '''Cancel''' to complete setup!<br />

<br />

<br />

{|class="gallery" style="font-style: italic"

<div class="iosgallery">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20025.PNG">

|width="400pt" style="padding:0px 0px;" align="left"|[[File:FailsafeDialog.png|x200px]]

<div class="iostext">Click <b>Proceed</b> to start teaching the throttle failsafe position</div>

|width="400pt" style="padding:0px 20px;" align="left"|[[File:Setfailsafe.png|x250px]]

|}<br />

<div class="iosgallery">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20027.PNG">

<div class="iostext">Move throttle to lowest position at which the motor is turned off</div>

<div class="iosgallery">

<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20027.PNG">

<br />

<br />

<br />

{{WARNING_QUOTE|'''During failsafe setting the CH5 Output is enabled and can be controlled by the transmitter channel that is assigned to throttle function.''' This allows to check your throttle position in reality. When using electric models make sure the motor is disconnected from the ESC or the pinion is removed from the motor, so that it will not drive the model by accident.

{{WARNING_QUOTE|'''During failsafe setting the CH5 Output is enabled and can be controlled by the transmitter channel that is assigned to throttle function.''' This allows to check your throttle position in reality. When using electric models make sure the motor is disconnected from the ESC or the pinion is removed from the motor, so that it will not drive the model by accident.