Manuals:MBPlusFblV5:Setupmenu A

From BEASTX Wiki
Revision as of 11:04, 27 November 2017 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

MICROBEAST PLUS can be mounted in nearly all possible orientations. The only restriction is that the main connection terminal has to point in or against flying direction and the egdes of the unit must be parallel to the rotation axis.

Adjustment at the device

Select the orientation that the device is actually mounted on your heli. There are 8 possible options indicated by the color of the Status-LED. You can switch between the options by briefly moving the rudder stick to one or the other direction. The Status-LED will change the color accordingly.

Status-LED Device orientation
off flat, sticker on top side, socket points in flight direction
purple flashing vertical, button is on the top, socket points in flight direction
purple flat inverted, sticker on bottom side, socket points in flight direction
red flashing vertical inverted, button is on the bottom, socket points in flight direction
red flat, sticker on top side, socket points to the tail boom
blue flashing vertical, button is on the top, socket points to the tail boom
blue flat inverted, sticker on bottom side, socket points to the tail boom
red/blue vertical inverted, button is on the bottom, socket points to the tail boom




When finished briefly push the button to save the configuration and to proceed to Setup menu point B.