Bureaucrats, Administrators, translate-proofr
15,511
edits
Changes
Jump to navigation
Jump to search
Line 11:
Line 11: + Line 32:
Line 33: − +
no edit summary
<br />
<br />
= Adjustment on the device = <!--T:3-->
1. Move the stick(s) for '''aileron''' and elevator''' on the radio and check whether the swashplate is '''moved correctly''' on the helicopter.<br />
1. Move the stick(s) for '''aileron''' and elevator''' on the radio and check whether the swashplate is '''moved correctly''' on the helicopter.<br />
(Note for beginners: the swashplate must follow the stick movement, so pushing elevator forward will tilt the swashplate forwards, adding aileron to the right will move the swash to the right and so on.)<br />
(Note for beginners: the swashplate must follow the stick movement, so pushing elevator forward will tilt the swashplate forwards, adding aileron to the right will move the swash to the right and so on.)<br />
'''If the stick is moving the swashplate into the wrong direction use the reverse function of your transmitter''' and reverse the aileron and/or elevator channel in the transmitter to set stick control direction correctly.<br />
'''If the stick is moving the swashplate into the wrong direction use the reverse function of your transmitter''' and reverse the aileron and/or elevator channel in the transmitter to set stick control direction correctly.<br />
<br />
<br />
2. Now set the internal control direction of the MICROBEAST PLUS gyro: When you push elevator <span style="color: #4169E1;">'''forwards'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color and you should see the label '''forwards''' getting <span style="color: #4169E1;">'''blue'''</span> as well. When you pull elevator <span style="color: #DC143C;">'''backwards'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color and you should see the label '''backwards''' getting <span style="color: #DC143C;">'''red'''</span> as well. When you move aileron to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move aileron to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by choosing one of the four buttons below the direction label.<br />
2. Now adjust the internal control direction of the MICROBEAST PLUS gyro: When you push elevator <span style="color: #4169E1;">'''forwards'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color and you should see the label '''forwards''' getting <span style="color: #4169E1;">'''blue'''</span> as well. When you pull elevator <span style="color: #DC143C;">'''backwards'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color and you should see the label '''backwards''' getting <span style="color: #DC143C;">'''red'''</span> as well. When you move aileron to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move aileron to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by choosing one of the four buttons below the direction label.<br />
<br />
<br />
3. When the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the aileron or elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick reaches the end position and the label in the software changes to "OK"'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and internal end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />
3. When the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the aileron or elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick reaches the end position and the label in the software changes to "OK"'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and internal end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />