Changes

2. Now set the internal control direction of the MICROBEAST PLUS gyro: When you push elevator <span style="color: #4169E1;">'''forwards'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you pull elevator <span style="color: #DC143C;">'''backwards'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. When you move aileron to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move aileron to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by tapping the rudder stick.''' There are four possible options, only one is correct! In short: <span style="color: #4169E1;">'''aileron right + elevator forwards the Status LED must be blue'''</span>, <span style="color: #DC143C;">'''aileron left + elevator backwards the Status LED must be red.'''</span> When the LED is purple or shines in the contrary color, you've not set the correct option.<br />

2. Now set the internal control direction of the MICROBEAST PLUS gyro: When you push elevator <span style="color: #4169E1;">'''forwards'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you pull elevator <span style="color: #DC143C;">'''backwards'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. When you move aileron to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move aileron to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by tapping the rudder stick.''' There are four possible options, only one is correct! In short: <span style="color: #4169E1;">'''aileron right + elevator forwards the Status LED must be blue'''</span>, <span style="color: #DC143C;">'''aileron left + elevator backwards the Status LED must be red.'''</span> When the LED is purple or shines in the contrary color, you've not set the correct option.<br />

<br />

<br />

3. Optional: When you move stick(s) to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the aileron and elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick(s) reach the end position'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just changes from flashing to solid when reaching the end position.)<br />

3. Optional: When you move stick(s) to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the aileron and elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick(s) reach the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end positions.)<br />

<br />

<br />

{{QUOTE|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the swashplate.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />

{{QUOTE|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the swashplate.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />