7,241
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − {{TOC_MBPlusV5}} + Line 43:
Line 43: − <br /> − <br /> − − =Basic setup with StudioX= − When StudioX is started and your MICROBEAST PLUS was detected by StudioX click the Basic Setup tab to show the adjustment options of SETUP MENU. The options you see here are basically similar to the Menu Points you can change directly at the device. There might be little differences because of the different nature of the computer setup. Wait until the system has initialized completely (if not the setup options will not be accessible!). Then if you like you can click the '''Wizard button''' on top of the options table. This will guide you from Menu Points A to N (M when governor function is not provided). When you've finished one adjustment step, always click the '''Next button''' at each step to proceed to the next option. It is not a must to use the '''Wizard button''' and you can setup each menu point of your choice independent from each other, but it is advisable to use the '''Wizard button''' so you don't miss any setup step. Also note the Menu Points sometimes build on each other, so adjusting some points without doing the preceeding steps is not useful!<br /> − <br /> − {|class="gallery" style="font-style: italic" − |- − |width="400pt" style="padding:0px 0px;" align="left"|[[File:1 clickBasicSetup.PNG|x250px]] − |width="400pt" style="padding:0px 20px;" align="left"| [[File:2 basicSetupWizard.PNG|x250px]] − |}<br /> − '''Note:''' When you cannot access the menu options because the system does not finish initialization sequence, make sure the radio system is powered up and bound correctly and proceed with [[Manuals:MBPlusFblV5:ReceiverType/en|RECEIVER MENU adjustment]] first, if necessary!<br />
Manuals:MBPlusFblV5:Setupmenu intro/en (view source)
Revision as of 13:26, 13 July 2018
, 5 years agoImporting a new version from external source
{{DISPLAYTITLE:SETUP MENU (Basic heli setup)|noerror}}
{{DISPLAYTITLE:SETUP MENU (Basic heli setup)|noerror}}
{{TOC_MBPlusV5|Manuals:MBPlusFblV5:ReceiverType/en|Manuals:MBPlusFblV5:Setupmenu_A/en|SETUPMENU}}
__TOC__
__TOC__
<br />
<br />
==Stick control==
==Stick control==
In SETUP MENU we use the sticks of your transmitter to change settings and interact with the menu. Most often the rudder stick is used to change or adjust a value, i. e. choose the mounting direction of the device or trim a servo center position. And on the other hand the aileron stick (roll) is used to switch between menu items, i.e. cycle through the servos when doing the trimming. There can be exceptions, so sometimes the sticks simply do what they are supposed to do (i.e. pitch moves the pitch when doing the pitch adjustment), but notice that in general the menu control with rudder plus aileron is always the same. If not it will be mentioned in the instructions.<br />
In SETUP MENU we use the sticks of your transmitter to change settings and interact with the menu. Most often the rudder stick is used to change or adjust a value, i. e. choose the mounting direction of the device or trim a servo center position. And on the other hand the aileron stick (roll) is used to switch between menu items, i.e. cycle through the servos when doing the trimming. There can be exceptions, so sometimes the sticks simply do what they are supposed to do (i.e. pitch moves the pitch when doing the pitch adjustment), but notice that in general the menu control with rudder plus aileron is always the same. If not it will be mentioned in the instructions.<br />
<br />
<br />
<br />
<br />