7,261
edits
Changes
Jump to navigation
Jump to search
Manuals:MBUltraFblV5:Hardware Installation/en (view source)
Revision as of 14:32, 24 January 2023
, 1 year agoUpdating to match new version of source page
__NOTOC__
{{TOC_MBUltraFblV5|Manuals:MBUltraFblV5:Box_Content/en|Manuals:MBUltraFblV5:Radio_System/en||}}
{{DISPLAYTITLE:Hardware installation|noerror}}
__NOTOC__
=Attaching MICROBEAST ULTRA to the helicopter=
Attach the MICROBEAST ULTRA unit by using one of the provided 3M® gyropads at a preferably low vibrating position on your helicopter such as the gyro platform or receiver platform. You may need to choose another type of mounting pad depending on the vibration pattern of your helicopter.
<p>
There are eight possible mounting orientations: MICROBEAST ULTRA can be attached '''flat or upright''' on the helicopter. The '''servo connector pins must always point towards the front or rear''' of the helicopter. The small white sensor pinboard on the side must always be in line with flight direction:</p>
<div class="noprint">
{| cellspacing="20" style="text-align: center; width: 300px; font-size: 70%;"
|-
| colspan = "2" | [[Image:450 flat.jpg|x200px]]
| colspan = "2" | [[Image:450 upright.jpg|x200px]]
|-
| [[Image:orient1.jpg|x100px]]<br />flat, cover on top, servo connectors showing to front
| [[Image:orient3.jpg|x100px]]<br />flat, cover showing to bottom, servo connectors showing to front
| [[Image:orient2.jpg|x100px]]<br />upright, button on top, servo connectors showing to front
| [[Image:orient4.jpg|x100px]]<br />upright, button on bottom, servo connectors showing to front
|-
| [[Image:orient5.jpg|x100px]]<br />flat, cover on top, servo connectors showing to rear
| [[Image:orient7.jpg|x100px]]<br />flat, cover showing to bottom, servo connectors showing to rear
| [[Image:orient8.jpg|x100px]]<br />upright, button on bottom, servo connectors showing to rear
| [[Image:orient6.jpg|x100px]]<br />upright, button on top, servo connectors showing to rear
|}
</div>
<div class="onlyinprint">
{| cellspacing="20" style="text-align: center; width: 300px; font-size: 70%;"
|-
| colspan = "2" | [[Image:450 flat.jpg|x200px]]
| colspan = "2" | [[Image:450 upright.jpg|x200px]]
|-
| [[Image:orient1.jpg|x100px]]<br />flat, cover on top, servo connectors showing to front
| [[Image:orient3.jpg|x100px]]<br />flat, cover showing to bottom, servo connectors showing to front
| [[Image:orient2.jpg|x100px]]<br />upright, button on top, servo connectors showing to front
| [[Image:orient4.jpg|x100px]]<br />upright, button on bottom, servo connectors showing to front
|-
| [[Image:orient5.jpg|x100px]]<br />flat, cover on top, servo connectors showing to rear
| [[Image:orient7.jpg|x100px]]<br />flat, cover showing to bottom, servo connectors showing to rear
| [[Image:orient8.jpg|x100px]]<br />upright, button on bottom, servo connectors showing to rear
| [[Image:orient6.jpg|x100px]]<br />upright, button on top, servo connectors showing to rear
|}
</div>
{{NL}}
<div class="noprint">
{| cellspacing="20"
|- style="text-align: center;"
| [[Image:Mounting_trex500.jpg|x200px]]
|}
</div>
<div class="onlyinprint">
{| cellspacing="20"
|- style="text-align: center;"
| [[Image:Mounting_trex500.jpg|x100px]]
|}
</div>
<br />
{{QUOTE|[[File:Warning.png|18px|sub]] '''Pay attention that the edges of the Microbeast ULTRA unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft! On the other hand it is not important that the unit is directly placed on the rotation axis (which is nearly impossible) and also it is not important whether the system is placed in parallel to the ground or not.}}<br />
<br />
<br />
{{TOC_MBUltraFblV5|Manuals:MBUltraFblV5:Box_Content/en|Manuals:MBUltraFblV5:Radio_System/en||}}
{{DISPLAYTITLE:Hardware installation|noerror}}
__NOTOC__
=Attaching MICROBEAST ULTRA to the helicopter=
Attach the MICROBEAST ULTRA unit by using one of the provided 3M® gyropads at a preferably low vibrating position on your helicopter such as the gyro platform or receiver platform. You may need to choose another type of mounting pad depending on the vibration pattern of your helicopter.
<p>
There are eight possible mounting orientations: MICROBEAST ULTRA can be attached '''flat or upright''' on the helicopter. The '''servo connector pins must always point towards the front or rear''' of the helicopter. The small white sensor pinboard on the side must always be in line with flight direction:</p>
<div class="noprint">
{| cellspacing="20" style="text-align: center; width: 300px; font-size: 70%;"
|-
| colspan = "2" | [[Image:450 flat.jpg|x200px]]
| colspan = "2" | [[Image:450 upright.jpg|x200px]]
|-
| [[Image:orient1.jpg|x100px]]<br />flat, cover on top, servo connectors showing to front
| [[Image:orient3.jpg|x100px]]<br />flat, cover showing to bottom, servo connectors showing to front
| [[Image:orient2.jpg|x100px]]<br />upright, button on top, servo connectors showing to front
| [[Image:orient4.jpg|x100px]]<br />upright, button on bottom, servo connectors showing to front
|-
| [[Image:orient5.jpg|x100px]]<br />flat, cover on top, servo connectors showing to rear
| [[Image:orient7.jpg|x100px]]<br />flat, cover showing to bottom, servo connectors showing to rear
| [[Image:orient8.jpg|x100px]]<br />upright, button on bottom, servo connectors showing to rear
| [[Image:orient6.jpg|x100px]]<br />upright, button on top, servo connectors showing to rear
|}
</div>
<div class="onlyinprint">
{| cellspacing="20" style="text-align: center; width: 300px; font-size: 70%;"
|-
| colspan = "2" | [[Image:450 flat.jpg|x200px]]
| colspan = "2" | [[Image:450 upright.jpg|x200px]]
|-
| [[Image:orient1.jpg|x100px]]<br />flat, cover on top, servo connectors showing to front
| [[Image:orient3.jpg|x100px]]<br />flat, cover showing to bottom, servo connectors showing to front
| [[Image:orient2.jpg|x100px]]<br />upright, button on top, servo connectors showing to front
| [[Image:orient4.jpg|x100px]]<br />upright, button on bottom, servo connectors showing to front
|-
| [[Image:orient5.jpg|x100px]]<br />flat, cover on top, servo connectors showing to rear
| [[Image:orient7.jpg|x100px]]<br />flat, cover showing to bottom, servo connectors showing to rear
| [[Image:orient8.jpg|x100px]]<br />upright, button on bottom, servo connectors showing to rear
| [[Image:orient6.jpg|x100px]]<br />upright, button on top, servo connectors showing to rear
|}
</div>
{{NL}}
<div class="noprint">
{| cellspacing="20"
|- style="text-align: center;"
| [[Image:Mounting_trex500.jpg|x200px]]
|}
</div>
<div class="onlyinprint">
{| cellspacing="20"
|- style="text-align: center;"
| [[Image:Mounting_trex500.jpg|x100px]]
|}
</div>
<br />
{{QUOTE|[[File:Warning.png|18px|sub]] '''Pay attention that the edges of the Microbeast ULTRA unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft! On the other hand it is not important that the unit is directly placed on the rotation axis (which is nearly impossible) and also it is not important whether the system is placed in parallel to the ground or not.}}<br />
<br />
<br />