Bureaucrats, Administrators, translate-proofr
15,502
edits
Changes
Jump to navigation
Jump to search
Line 123:
Line 123: + + + + − <br /> '''When using a big heli with standard size servos it may be insufficient to only provide power at the [SYS] port or receiver.''' Adding additional power wires is highly recommended! If there are no other ports left to additionally feed in power, we recommend using the MICROBEAST PLUS HD which comes witch an additional high power input. This reduces wiring resistance and serves todays demands for a robust servo power supply.<br /> − + − == Graupner HOTT telemetry == <!--T:21-->+ −
no edit summary
== Single wire with telemetry == <!--T:19-->
== Single wire with telemetry == <!--T:19-->
When using a telemetry receiver and an ESC with telemetry data connector, the ESC is connected to the '''[IO1]''' output. The telemetry data signal of the ESC is connected to '''[IO2]''' input. (You will get further information about connecting the speed controller in a later section!)<br />
When using a telemetry receiver and an ESC with telemetry data connector, the ESC is connected to the '''[IO1]''' output. The telemetry data signal of the ESC is connected to '''[IO2]''' input. (You will get further information about connecting the speed controller in a later section!)<br />
<br />
== Graupner HOTT telemetry == <!--T:21-->
When using a Graupner HOTT receiver with telemetry uplink, the throttle servo or ESC is connected to the '''[IO2]''' output. The telemetry data signal of the ESC is connected at the side input of MICROBEAST ULTRA. Here "-" (minus) is the second pin from front and "S" (signal) is the third pin from front. "+" (plus) can be connected at the first pin from behind.<br />
<br />
<br />
== External power supply == <!--T:20-->
== External power supply == <!--T:20-->
You can connect a power supply (second BEC wire, battery) to the [SYS] port and/or to the receiver (in case this has additional servo or battery ports). All servo ports will form a parallel power circuit (except the port [RUD|PIT|AUX]; please do not connect anything here!).<br />
You can connect a power supply (second BEC wire, battery) to the [SYS] port and/or to the receiver (in case this has additional servo or battery ports). All servo ports will form a parallel power circuit (except the port [RUD|PIT|AUX]; please do not connect anything here!).<br />
<br />
<br />
{{WARNING_QUOTE|'''When using a big heli with standard size servos it may be insufficient to only provide power at the [SYS] port or receiver.''' Adding additional power wires is highly recommended! If there are no other ports left to additionally feed in power, we recommend using the MICROBEAST PLUS HD which comes witch an additional high power input. This reduces wiring resistance and serves todays demands for a robust servo power supply.}}<br />
<br />
When using a Graupner HOTT receiver with telemetry uplink, the throttle servo or ESC is connected to the '''[IO2]''' output. The telemetry data signal of the ESC is connected at the side input of MICROBEAST ULTRA. Here "-" (minus) is the second pin from front and "S" (signal) is the third pin from front. "+" (plus) can be connected at the first pin from behind.<br />
<br />
<br />
</translate>
</translate>