Bureaucrats, Administrators, translate-proofr
15,683
edits
Changes
Jump to navigation
Jump to search
Line 17:
Line 17: − +
no edit summary
1. Move the '''thrust''' stick up and down and check whether the '''pitch is changing direction correctly'''. If not already done at SETUP MENU point H, '''use the reverse function for the collective pitch channel in the transmitter''' to reverse direction of pitch movement in case it is wrong.<br />
1. Move the '''thrust''' stick up and down and check whether the '''pitch is changing direction correctly'''. If not already done at SETUP MENU point H, '''use the reverse function for the collective pitch channel in the transmitter''' to reverse direction of pitch movement in case it is wrong.<br />
<br />
<br />
2. Afterwards check the Status LED color: on <span style="color: #4169E1;">'''positive pitch'''</span> it must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted''' (red = positive and blue = negative), 'tap the '''rudder stick''' once to reverse the internal pitch direction of MICROBEAST ULTRA.<br />
2. Afterwards check the Status LED color: on <span style="color: #4169E1;">'''positive pitch'''</span> it must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted''' (red = positive and blue = negative), tap the '''rudder stick''' once to reverse the internal pitch direction of MICROBEAST ULTRA.<br />
<br />
<br />
3. When you move '''thrust stick to full deflection''' the Status LED should light '''solid''', not just flash. If this is not the case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />
3. When you move '''thrust stick to full deflection''' the Status LED should light '''solid''', not just flash. If this is not the case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />