Changes

|colspan="14" style="color: white; background-color:#FF3300;"|'''off'''

|colspan="14" style="color: white; background-color:#FF3300;"|'''off'''

|colspan="13" style="color: white; background-color:#FF3300;"|'''on'''

|colspan="13" style="color: white; background-color:#FF3300;"|'''on'''

|}

|}<br />

<br />

<br />

===AttitudeControl with combined switch channel=== <!--T:3-->

===AttitudeControl with combined switch channel=== <!--T:3-->

<br >

<br >

'''Note for software versions before 4.1.x:''' When AttitudeControl is enabled in general the tail gyro can not be used in Normal-Rate mode. If operating AttitudeControl with separate switch channel (see above) the channel for tail gyro gain activates HeadingLock - Mode in both directions. The sign of deflection is not relevant here, just the amount of deflection is important. When you also want to use the tail gyro in Normal-Rate mode (as described [[Manuals:MB_Plus:Flying|here]]) you must disable AttitudeControl at [[Manuals:MB_Plus:Parametermenu_I|Parameter menu point '''I''']] (by setting the Status-LED to „off“ state).}}<br />

'''Note for software versions before 4.1.x:''' When AttitudeControl is enabled in general the tail gyro can not be used in Normal-Rate mode. If operating AttitudeControl with separate switch channel (see above) the channel for tail gyro gain activates HeadingLock - Mode in both directions. The sign of deflection is not relevant here, just the amount of deflection is important. When you also want to use the tail gyro in Normal-Rate mode (as described [[Manuals:MB_Plus:Flying|here]]) you must disable AttitudeControl at [[Manuals:MB_Plus:Parametermenu_I|Parameter menu point '''I''']] (by setting the Status-LED to „off“ state).}}<br />

<br />

<br />

===Functional test of AttitudeControl=== <!--T:4-->

===Functional test of AttitudeControl=== <!--T:4-->

When activating AttitudeControl you should be able to see an immediate impact on the swashplate control: If the heli is tilted to one side, MICROBEAST PLUS permanently steers the swashplate opposed to the inclination. In the region around horizontal position the swashplate will always stay nearly horizontal to the ground. The system constantly tries to bring the helicopter back to the horizontal position as long as the helicopter is oblique.<br />

When activating AttitudeControl you should be able to see an immediate impact on the swashplate control: If the heli is tilted to one side, MICROBEAST PLUS permanently steers the swashplate opposed to the inclination. In the region around horizontal position the swashplate will always stay nearly horizontal to the ground. The system constantly tries to bring the helicopter back to the horizontal position as long as the helicopter is oblique.<br />

<div style="padding:0px 20px;">

[[File:Attitude_compensation_1.png|800px|noframe|none|border]]

<div>

[[File:Attitude_compensation_1.png|500px|border]]<br />

</div>

</div>

<br />

<br />

<div style="padding:0px 20px;">

<div>

[[File:Attitude_compensation_2.png|800px|noframe|none|border]]

[[File:Attitude_compensation_2.png|500px|border]]<br />

</div>

</div>

<br />

<br />

When AttitudeControl is deactivated on the other hand, the swashplate will always be moved back to neutral position (perpendicular to main rotor shaft) as soon as the helicopter is standing still for a few seconds, independant of the current leveling. Here the system only corrects currently occurring rotational movements, but does not regulate the absolute deviation from horizontal position.<br />

When AttitudeControl is deactivated on the other hand, the swashplate will always be moved back to neutral position (perpendicular to main rotor shaft) as soon as the helicopter is standing still for a few seconds, independant of the current leveling. Here the system only corrects currently occurring rotational movements, but does not regulate the absolute deviation from horizontal position.<br />

<br />

<br />

[[File:normal_compensation.png|500px|border]]<br />

[[File:normal_compensation.png|800px|noframe|none|border]]

</div>

<br />

<br />