Bureaucrats, Administrators, translate-proofr
15,475
edits
Changes
Jump to navigation
Jump to search
Line 13:
Line 13: + + Line 18:
Line 20: + + − + + +
no edit summary
<br />
<br />
The electronic speed controller is plugged into the [CH5] output.<br />
The electronic speed controller is plugged into the [CH5] output.<br />
<br />
[[Image:Governormenu_A_ESC.png|500px|none]]
<br />
<br />
When a speed controller is used that provides a rpm signal output you can alternatively use the [RPM] sensor input on the front connection board of MICROBEAST PLUS (lowest pin of the tripple signal input). (RPM sensors can‘t be connected here as this pin header does not provide any power supply!)
When a speed controller is used that provides a rpm signal output you can alternatively use the [RPM] sensor input on the front connection board of MICROBEAST PLUS (lowest pin of the tripple signal input). (RPM sensors can‘t be connected here as this pin header does not provide any power supply!)
The speed controller‘s signal input wire is plugged into the output [CH5] as usual.<br />
The speed controller‘s signal input wire is plugged into the output [CH5] as usual.<br />
<br />
[[Image:Governormenu_A_ESC_signalwire.png|500px|none]]
<br />
<br />
===Combustion drive system (nitro/gas)===
===Combustion drive system (nitro/gas)===
Particularly when using sensors for combustion engines check for correct polarity of the sensor power supply on the adapter cable BXA76401. Here commonly sensors are used that are designed for governor systems from other manufacturers and therefore have a special pin assignment. In this case the colors of the connecting cables may not follow the norm. (The wire colors of the ALIGN governor sensor HE50H22 are swapped for example. Here red denotes the negative and black the positive pole!)<br />
Particularly when using sensors for combustion engines check for correct polarity of the sensor power supply on the adapter cable BXA76401. Here commonly sensors are used that are designed for governor systems from other manufacturers and therefore have a special pin assignment. In this case the colors of the connecting cables may not follow the norm (The wire colors of the ALIGN governor sensor HE50H22 are swapped for example. Here red denotes the negative and black the positive pole!).<br />
<br />
[[Image:Governormenu_A_nitro.png|500px|none]]
<br />
<br />