Changes

{{DISPLAYTITLE:Introduction|noerror}}

{{DISPLAYTITLE:Introduction|noerror}}

===MICROBEAST PLUS - What is this?===

===MICROBEAST PLUS - What's that?===

<p>

<p>

MICROBEAST PLUS is the official successor of the famous MICROBEAST flybarless system. In comparance to MICROBEAST the hardware has been revised thoroughly to be on par with the state of the art. Latest MEMS sensors and faster processing gives a more precise control in all flight situations. At the moment MICROBEAST PLUS can only be used in combination with RC model helicopters. Different application types will be available soon.</p>

MICROBEAST PLUS is a gyro system which is used to stabilize and control your flybarless RC Helikopter on all three flight axis. It can be used with many different types of helicopters like 3D aerobatic helis, F3C competition helicopters as well as scale helicopters with 2 or more rotorblades. The system comes with basic flybarless stabilization functionality and can be upgraded by paid update to the "ProEdition" which enables additional features like AttitudeControl for recue bailout or constant leveling.</p>

<p>

<p>

If you have MICROBEAST already in use you will find that the setup of MICROBEAST PLUS runs as usual. The proven „EasySetup“ concept and ease of use is maintained. So upgrading to MICROBEAST  

If you have the former MICROBEAST already in use you will find that the setup of MICROBEAST PLUS runs as usual. The proven „EasySetup“ concept and ease of use is maintained. So upgrading to MICROBEAST  

PLUS is very easy. As MICROBEAST PLUS is much more powerful than MICROBEAST, it is specifically tailored for use with the StudioX software solution that enables more complex adjustment processes thus resulting in completely new applications. We recommend to visit this wiki and our [http://www.beastx.com/eng/support.php support website] from time to time to get the latest features for your MICROBEAST PLUS.</p>

PLUS is very easy. As MICROBEAST PLUS is much more powerful than MICROBEAST, it is specifically tailored for use with the StudioX software solution that enables more complex adjustment processes thus resulting in completely new applications. We recommend to visit this wiki and our [http://www.beastx.com/eng/support.php support website] from time to time to get the latest features for your MICROBEAST PLUS.</p>

 

===Firmware version display===

===Firmware version display===

<p>'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 4.x.x!'''</p>

<p>'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 4.x.x!'''</p>

<p>The firmware version can be detected by connecting the unit to a computer by using the USB2SYS  

<p>The firmware version can be detected by connecting the unit to a computer by using the USB2SYS  

interface together with the StudioX software bundle .Also you can directly read on the MICROBEAST

interface together with the StudioX software bundle. During initialization also you can directly read from the display of the device what firmware version it is running:

PLUS unit during the initialization phase what firmware version your MICROBEAST PLUS is running:

MICROBEAST PLUS first carries out a brief LED test by lighting up all Menu-LEDs simultaneously, and  

MICROBEAST PLUS first carries out a brief LED test by lighting up all Menu-LEDs simultaneously, and  

cycling the Status-LED color (red->blue->purple). Then for about 3 seconds, the Status-LED lights red  

cycling the Status-LED color (red->blue->purple). Then for about 3 seconds, the Status-LED lights red  

second digit of the firmware version in binary format. By briefly pushing the button you can get more version informations displayed. In respect to the  

second digit of the firmware version in binary format. By briefly pushing the button you can get more version informations displayed. In respect to the  

manual this information is not important.</p>

manual this information is not important.</p>

<p>&nbsp;</p>

<br />

[[Image:Version display 400.png|left]]

[[Image:Version display 400.png|150px|left]]

[[Image:Version display 400.png|200px|left]]

<br />

<br />

<div class="onlyinprint">

<div class="onlyinprint">

[[File:Blank_30.png]]

[[Image:Blank_30.png]]

</div>

</div>

<p>'''Firmware version 4.1.x'''</p>

'''Firmware version 4.2.x'''<br />

In the left row menu LED C shows the major version „4“.<br />

<p>In the left row menu LED C shows the major version „4“.<br />

In the right row menu LED H shows minor version „1“.<br />

In the right row menu LED I shows minor version „2“.</p>

<div style="clear: both;"></div>

<div style="clear: both;"></div>

{{NL}}

{{NL}}