Changes

<p>

<p>

The MICROBEAST PLUS unit can be attached '''flat or upright''' on the helicopter. However, the '''servo connector pins must always point towards the front or rear''' of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction.</p>

The MICROBEAST PLUS unit can be attached '''flat or upright''' on the helicopter. However, the '''servo connector pins must always point towards the front or rear''' of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction.</p>

<gallery widths="350" heights="300" mode="nolines">

<gallery widths="400" heights="250" mode="nolines">

Image:450 flat.jpg

Image:450 flat.jpg

Image:450 upright.jpg

Image:450 upright.jpg

</gallery>

</gallery>

<p>&nbsp;</p>

</div>

<div class="onlyinprint">

</div>

<p>

<p>

'''Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft! On the other hand it is not important that the unit is directly placed on the rotation axis (which is nearly impossible).</p>

'''Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft! On the other hand it is not important that the unit is directly placed on the rotation axis (which is nearly impossible).</p>

<gallery widths="500" heights="300" mode="nolines">

<gallery widths="500" heights="250" mode="nolines" style="padding:5px 130px; ">

Image:Mounting_trex500.jpg

Image:Mounting_trex500.jpg

</gallery>

</gallery>

<div class="clear"></div>  

<div class="onlyinprint">

</div>

<p>

<p>

'''There are eight possible mounting orientations:'''

'''There are eight possible mounting orientations:'''

You can use nearly any transmitter that provides at least 6 channels. By default 5 channels are used for controlling Microbeast PLUS and one channel controls the motor. If using additional features like AttitudeControl or (nitro) RPM Governor more channels may be useful to have.<br />

You can use nearly any transmitter that provides at least 6 channels. By default 5 channels are used for controlling Microbeast PLUS and one channel controls the motor. If using additional features like AttitudeControl or (nitro) RPM Governor more channels may be useful to have.<br />

<br />

<br />

Create a new model in your radio‘s model memory. Disable any mixing functions for the swashplate or rudder. Each function should be assigned to just one receiver channel.

Create a new model in your radio‘s model memory. Disable any mixing functions for the swashplate or rudder. Each function should be assigned to just one receiver channel.<br />

<p>&nbsp;</p>

<br />

<p>

{{QUOTE|'''Never enable your radio‘s eCCPM mixing function!''' All the swashplate mixing will be done by Microbeast PLUS. Always set your radio‘s swash mixer to mCCPM (mechanical mixing) which is often called “H1”,  “1 servo” or “normal“ mixing or disable “swash mixing” if applicable.}}

{{QUOTE|'''Never enable your radio‘s eCCPM mixing function!''' All the swashplate mixing will be done by Microbeast PLUS. Always set your radio‘s swash mixer to mCCPM (mechanical mixing) which is often called “H1”,  “1 servo” or “normal“ mixing or disable “swash mixing” if applicable.}}

<!--T:4-->

<!--T:4-->

<p>

<p>

Other functions such as throttle curves, ESC switches or auxiliary functions can be adjusted as usual. When using the RPM Governor function the throttle adjustment will be described later. Also the switch assignment for AttitudeControl will discussed at the specific topic.</p>

Other functions such as throttle curves, ESC switches or auxiliary functions can be adjusted as usual. When using the RPM Governor function the throttle adjustment will be described later. Also the switch assignment for AttitudeControl will discussed at the specific topic.</p>

<p>&nbsp;</p>

<br />

<p>

{{QUOTE|[[File:Warning.png|18px|sub]] '''Always make sure that the motor in electric models can not start when doing the adjustment work!''' If the drive battery is used as power supply for receiver, servos and Microbeast PLUS, disconnect the motor from the ESC.}}

{{QUOTE|[[File:Warning.png|18px|sub]] '''Always make sure that the motor in electric models can not start when doing the adjustment work!''' If the drive battery is used as power supply for receiver, servos and Microbeast PLUS, disconnect the motor from the ESC.}}</p>

</translate>

</translate>