Bureaucrats, Administrators, translate-proofr
15,475
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: − + − + − + − + + + + + + + + + + + + + + − The MICROBEAST PLUS unit can be attached flat or upright and even upside down under the helicopter. However, the servo connector pins must always point toward the front (or rear) of the helicopter.<br /> − <br /> − [[Image:Mounting TRex500.png|616px|border]]<br/>+ + + + + + − Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding axes of the helicopter! And be sure that the mounting platform is perpendicular to the main shaft! −
no edit summary
===Mounting the Microbeast PLUS unit=== <!--T:2-->
===Mounting the Microbeast PLUS unit=== <!--T:2-->
Attach the Microbeast PLUS unit by using one of the provided gyropads at a preferably low vibrating position on your helicopter such as the gyro platform or receiver platform. You may need to choose another type of mounting pad depending on the vibration pattern of your helicopter. For more information please ask you Microbeast PLUS dealer.<br />
Attach the Microbeast PLUS unit by using one of the provided 3M® gyropads at a preferably low vibrating position on your helicopter such as the gyro platform or receiver platform. You may need to choose another type of mounting pad depending on the vibration pattern of your helicopter. For more information please ask you Microbeast PLUS dealer.<br />
<br />
<br />
<gallery>
[[File:450 flat.jpg|noframe|x300px]]
File:MBplus flat.png
<span style="position:relative;left:50px;top:0px">
File:MBplus upright.png
[[File:450 upright.jpg|noframe|x300px]]
</span>
<br />
<br />
The MICROBEAST PLUS unit can be attached flat or upright on the helicopter. However, the servo connector pins must always point towards the front or rear of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction.<br />
<br />
Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter! Especially make sure that the mounting platform is perpendicular to the main shaft! On the other hand it is not important that the unit is directly placed on the rotation axis (which is nearly impossible).<br/>
<br/>
'''There are eight possible mounting orientations:'''
<gallery mode="nolines" widths=200px>
File:orient1.jpg|flat, cover on top, servo connectors showing to front
File:orient2.jpg|upright, button on top, servo connectors showing to front
File:orient3.jpg|flat, cover showing to bottom, servo connectors showing to front
File:orient4.jpg|upright, button on bottom, servo connectors showing to front
</gallery>
</gallery>
<br/>
<br/>
<gallery mode="nolines" widths=200px>
File:orient5.jpg|flat, cover on top, servo connectors showing to rear
File:orient6.jpg|upright, button on top, servo connectors showing to rear
File:orient7.jpg|flat, cover showing to bottom, servo connectors showing to rear
File:orient8.jpg|upright, button on bottom, servo connectors showing to rear
</gallery>
<br/>
<br/>
===Preparing the transmitter=== <!--T:3-->
===Preparing the transmitter=== <!--T:3-->