Changes

The MICROBEAST PLUS unit can be attached '''flat or upright''' on the helicopter. However, the '''servo connector pins must always point towards the front or rear''' of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction.<br />

The MICROBEAST PLUS unit can be attached '''flat or upright''' on the helicopter. However, the '''servo connector pins must always point towards the front or rear''' of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction.<br />

<br />

<br />

[[File:450 flat.jpg|noframe|x300px]]

Image:450 flat.jpg

[[File:450 upright.jpg|noframe|x300px]]

Image:450 upright.jpg

</gallery>

<br />

<br />

<br />

<br />

<br />

'''Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft! On the other hand it is not important that the unit is directly placed on the rotation axis (which is nearly impossible).<br/>

'''Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft! On the other hand it is not important that the unit is directly placed on the rotation axis (which is nearly impossible).<br/>

<br />

<br />

<span style="position:relative;left:80px;top:0px">

<gallery widths="500" heights="300" mode="nolines">

[[File:Mounting_trex500.jpg|noframe|x250px]]

Image:Mounting_trex500.jpg

</span>

</gallery>

<div class="clear"></div>  

<div class="clear"></div>  

<br />

<br />