Bureaucrats, Administrators, translate-proofr
15,502
edits
Changes
Jump to navigation
Jump to search
Line 16:
Line 16: − + − <br /> −
no edit summary
{{QUOTE|Only the trimmed servo positions are important and get stored (those which have been set with the corresponding Status-LED colors). The servo positions at '''Status-LED off''' only serve for reference and to get the servo horns best plugged into position, for instance if you install new servos or replace the servo gears after a crash. This reference position will not be used later onwards. '''Only the servo positions with active trimming are important.'''}}<br />
{{QUOTE|Only the trimmed servo positions are important and get stored (those which have been set with the corresponding Status-LED colors). The servo positions at '''Status-LED off''' only serve for reference and to get the servo horns best plugged into position, for instance if you install new servos or replace the servo gears after a crash. This reference position will not be used later onwards. '''Only the servo positions with active trimming are important.'''}}<br />
<br />
<br />
'''Now if servos are trimmed do not yet proceed to the next menu point.'''<br />
'''Now if servos are trimmed do not yet proceed to the next menu point.''' With active trimming ('''Status-LED still lights up in one color!''') adjust the linkage rods according to your helicopter manual. The swashplate should now be at the midpoint and perpendicular to the main shaft and the rotor blades should have 0 degrees of pitch. Always work this out from bottom (servos) to top (blade grips). Also don‘t forget to level and phase the swashplate driver in the correct way (if it‘s adjustable)! At 0 degrees of pitch the swash driver arms must be horizontal and the linkage balls of the blade grips have to be perpendicular to the spindle shaft.<br />
With active trimming ('''Status-LED still lights up in one color!''') adjust the linkage rods according to your helicopter manual. The swashplate should now be at the midpoint and perpendicular to the main shaft and the rotor blades should have 0 degrees of pitch. Always work this out from bottom (servos) to top (blade grips). Also don‘t forget to level and phase the swashplate driver in the correct way (if it‘s adjustable)! At 0 degrees of pitch the swash driver arms must be horizontal and the linkage balls of the blade grips have to be perpendicular to the spindle shaft.<br />
<br />
<br />
[[Image:Swashdriver_1.png|600px|none|border]]<br />
[[Image:Swashdriver_1.png|600px|none|border]]<br />