Changes

{{TOC_MBPlus}}

{{TOC_MBPlus}}

{{DISPLAYTITLE:Setup menu point I|noerror}}

{{DISPLAYTITLE:Setup menu point I|noerror}}

At Setup menu point '''I''' you adjust the correct swashplate servo directions. To facilitate this setup you don’t need to adjust every servo by its own but just try the 4 possible combinations. Move the thrust stick and check if the swashplate moves up and down horizontally. The direction itself is not yet important. If one or more servos are not running in the right direction choose another combination of servo directions by giving a short rudder input. Repeat this rudder input until you find the combination where all servos are running in the same direction and moving collective pitch up or down.<br />

At Setup menu point I, you adjust the correct swashplate servo directions. To facilitate this setup, you don’t need to adjust every servo by its own, but just try the 4 possible combinations. Move the thrust stick and check if the swashplate moves horizontally up and down. The direction itself is not yet important. If one or more servos are not running in the right direction, just choose another combination of servo directions by giving a short rudder input. Repeat this rudder input until all servos are running in the same direction and moving collective pitch up and down.<br />

<br />

<br />

{{TABLE|Servo directions<br />CH1 - CH2 - CH3|normal - reverse - reverse|normal - normal - reverse|normal - reverse - normal|normal - normal - normal}}

{{TABLE|Servo directions<br />CH1 - CH2 - CH3|normal - reverse - reverse|normal - normal - reverse|normal - reverse - normal|normal - normal - normal}}

'''Note:''' This menu item will not be left automatically after 4 minutes, so you have plenty of time to adjust the mechanical setup.<br />

'''Note:''' This menu item will not be left automatically after 4 minutes, so you have plenty of time to adjust the mechanical setup.<br />

<br />

<br />

Push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_J|Setup menu point '''J''']].

Push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_J|Setup menu point '''J''']].

</translate>

</translate>