Changes

2) Setting up user defined values: All menu items offer the possibility to apply either the fixed values or to select your own values ​​(in a usefull range) and find your personal adjustment. The possible range of values ​​is visualized by the bars in the display. The individual value(s) ​​can be entered using the input panel(s) on the left (except for the swashplate mixers, here's the stuff in the middle). By clicking the arrow keys up or down, the values ​​can be adjusted in steps of 1. Alternatively, you can also click the panel and directly enter a numeric value (so far as it is within the possible range of values). This value is stored immediately in Microbeast but to also use it, it is necessary, to select "User defined" option instead of fixed the values in the MICROBEAST's menu - either by just using the drop-down menu on the right or (esspecially useful later on the field) directly by using the tail stick to select "LED off" in the menu at the appropriate menu point. For example you can test the new value on the airfield and also change back at any time to a fixed default value or even change between values several times. The custom value itself remains stored in the microprocessor and the computer is only necessary if you want to change it again.

2) Setting up user defined values: All menu items offer the possibility to apply either the fixed values or to select your own values ​​(in a usefull range) and find your personal adjustment. The possible range of values ​​is visualized by the bars in the display. The individual value(s) ​​can be entered using the input panel(s) on the left (except for the swashplate mixers, here's the stuff in the middle). By clicking the arrow keys up or down, the values ​​can be adjusted in steps of 1. Alternatively, you can also click the panel and directly enter a numeric value (so far as it is within the possible range of values). This value is stored immediately in Microbeast but to also use it, it is necessary, to select "User defined" option instead of fixed the values in the MICROBEAST's menu - either by just using the drop-down menu on the right or (esspecially useful later on the field) directly by using the tail stick to select "LED off" in the menu at the appropriate menu point. For example you can test the new value on the airfield and also change back at any time to a fixed default value or even change between values several times. The custom value itself remains stored in the microprocessor and the computer is only necessary if you want to change it again.

  If you move the mouse pointer over the value adjustment panel, the possible range of values and also ​​the default value will be displayed.

    Wenn man mit dem Mauszeiger über das Einstellpanel fährt, so wird der mögliche Wertebereich angezeigt sowie der Standardwert. Der Standardwert entspricht in den meisten Fällen dem Standardwert der festen Vorgabewerte (diese sind im Dropdown - Menü mit einem '*' markiert), so dass man einen ungefähren Anhaltspunkt bekommt, um ein eigenes Setup zu erfliegen.

  The default values should be a good starting point and mostly correspond to the factory preset set values (in the dropdown menu these are marked with '*').