Changes

<!--T:3-->

<!--T:3-->

The following receiver systems/receiver types support SRXL and work in combination with MICROBEAST and MICROBEAST plus:

The following receiver systems/receiver types support SRXL and work in combination with MICROBEAST and MICROBEAST PLUS:

<!--T:4-->

<!--T:4-->

| MULTIPLEX                                    || Receivers with M-Link data port (firmware update may be necessary)

| MULTIPLEX                                    || Receivers with M-Link data port (firmware update may be necessary)

|-

|-

| GRAUPNER / SJ HOTT                             || HOTT receivers with SUMD output (firmware update may be necessary)

| GRAUPNER / SJ HOTT                           || HOTT receivers with SUMD output (firmware update may be necessary)

| SPEKTRUM                                      || AR9020 receiver (only in combination with Microbeast PLUS)

|}

|}

<!--T:5-->

<!--T:5-->

The following receiver systems are compatible with SRXL as they directly implemented the SRXL protocol as specified for MULTIPLEX. MICROBEAST and MICROBEAST plus will work without issues with these receivers, but be aware that due to the same manufacturer ID they will be identified as MULTIPLEX receivers and therefore the preset channel assignment of MICROBEAST/MICROBEAST plus may not fit to your radio system, so a manual channel assignment is mandatory (see pages 28ff in MICROBEAST manual):

The following receiver systems are compatible with SRXL as they directly implemented the SRXL protocol as specified for MULTIPLEX. MICROBEAST and MICROBEAST PLUS will work without issues with these receivers, but be aware that due to the same manufacturer ID they will be identified as MULTIPLEX receivers and therefore the preset channel assignment of MICROBEAST/MICROBEAST PLUS may not fit to your radio system, so a manual channel assignment is mandatory (see chapter 5 in MICROBEAST/MICROBEAST PLUS manual):

<!--T:6-->

<!--T:6-->