Changes

* Make sure the wiring is connected correctly. The servo wire coming from the USB interface goes into SYS port on your MICROBEAST / AR7xxxBX device. Watch out for correct polarity and make sure that the device is powered in case it is not powered from the USB interface (this is only the case with the RX2SIM interface).

* Make sure the wiring is connected correctly. The servo wire coming from the USB interface goes into SYS port on your MICROBEAST / AR7xxxBX device. Watch out for correct polarity and make sure that the device is powered in case it is not powered from the USB interface (this is only the case with the RX2SIM interface).

* On computers with Microsoft Windows operating system make sure the driver files for the USB2SYS / SPMA3030 / RX2SIM interface has been installed as described [[USB2SYS/SPMA3030_driver_installation/en|here]].

* On computers with Microsoft Windows operating system make sure the driver files for the USB2SYS / SPMA3030 / RX2SIM interface has been installed as described [[USB2SYS/SPMA3030_driver_installation/en|here]].

* Check the PlugIn configuration for your device within StudioX (in the menu bar click "Edit" and choose the "Plugins.." entry) as described [[StudioX_Microbeast_Plugin/en#Saving_changes_manually.2Fautomatically|here]] for example.<br />

* Check the PlugIn configuration for your device within StudioX (in the menu bar click "Edit" and choose the "Plugins.." entry) as described [[StudioX_Microbeast_Plugin/en#Advanced_plugin_configuration|here]] for example.<br />

<br />

<br />

''I connect the USB2SYS/SPMA3030 inteface to my MICROBEAST / AR7xxxBX and to the computer but nothing happens except the blue LED lights up on the USB2SYS.''<br />

''I connect the USB2SYS/SPMA3030 inteface to my MICROBEAST / AR7xxxBX and to the computer but nothing happens except the blue LED lights up on the USB2SYS.''<br />