Bureaucrats, Administrators, translate-proofr
16,261
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: + Line 5:
Line 6: + Line 11:
Line 13: − +
Marked this version for translation
<translate>
<translate>
<!--T:6-->
{{DISPLAYTITLE:SETUP MENU I - Servo directions|noerror}}
{{DISPLAYTITLE:SETUP MENU I - Servo directions|noerror}}
{{TOC_MBPlusV5}}
{{TOC_MBPlusV5}}
<br />
<br />
<!--T:7-->
At SETUP MENU point I move the collective pitch on the transmitter and change the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />
At SETUP MENU point I move the collective pitch on the transmitter and change the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />
<br />
<br />
<br />
<br />
=Adjustment on the device=
=Adjustment on the device= <!--T:8-->
By tapping the aileron stick you can select one servo after another. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the rudder stick once to change the servo direction. You can switch back and forth between the servos as often as you need.<br />
By tapping the aileron stick you can select one servo after another. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the rudder stick once to change the servo direction. You can switch back and forth between the servos as often as you need.<br />
<br />
<br />