7,558
edits
Changes
Jump to navigation
Jump to search
Translations:Help:FAQ:Inflight/3/en (view source)
Revision as of 11:03, 27 February 2018
, 6 years agoImporting a new version from external source
=The gyro sensors do not seem to work correctly.=
''The rudder servo does not react or reacts very slowly to rotation of the helicopter.''<br />
* Maybe the gain of tail gyro is too low. Check assignment of gain channel and adjust the gain in the transmitter as described in the manual.
* Additionally when the elevator doesn't seem to work either, maybe the wrong mounting orientation has been selected. So select the correct mounting orientation in Setup menu point '''A'''.<br />
<br />
Please note: With AR7210BX and firmware version 4.x.x or greater the setting of device orientation has changed compared to older devices/firmware and there are more options now. Do not use the same LED color as before as it is very likely this will be wrong. READ THE MANUAL!<br />
<br />
<br />
''The rudder servo does not react or reacts very slowly to rotation of the helicopter.''<br />
* Maybe the gain of tail gyro is too low. Check assignment of gain channel and adjust the gain in the transmitter as described in the manual.
* Additionally when the elevator doesn't seem to work either, maybe the wrong mounting orientation has been selected. So select the correct mounting orientation in Setup menu point '''A'''.<br />
<br />
Please note: With AR7210BX and firmware version 4.x.x or greater the setting of device orientation has changed compared to older devices/firmware and there are more options now. Do not use the same LED color as before as it is very likely this will be wrong. READ THE MANUAL!<br />
<br />
<br />