7,558
edits
Changes
Jump to navigation
Jump to search
Translations:Help:FAQ:Inflight/11/en (view source)
Revision as of 11:04, 27 February 2018
, 6 years agoImporting a new version from external source
=Status-LED flashes in operation mode, i.e. after landing.=
The flashing Status-LED shows that a software-reset occurred during operation.
* The receiver power supply does not seem to be sufficient. The voltage during operation dropped in a critical area (<3.5 Volts). Use a stable power supply and make sure that the wiring and plugs are dimensioned big enough and feature low contact resistance. On large helicopters we recommend to use the AR7300BX with high power input.
* A reset can be triggered due to a transfer of high voltage. Take measures to prevent static discharges.<br />
<br />
<br />
The flashing Status-LED shows that a software-reset occurred during operation.
* The receiver power supply does not seem to be sufficient. The voltage during operation dropped in a critical area (<3.5 Volts). Use a stable power supply and make sure that the wiring and plugs are dimensioned big enough and feature low contact resistance. On large helicopters we recommend to use the AR7300BX with high power input.
* A reset can be triggered due to a transfer of high voltage. Take measures to prevent static discharges.<br />
<br />
<br />