7,593
edits
Changes
Jump to navigation
Jump to search
Translations:Manuals:MBUltraFblV5:Receiver N/2/en (view source)
Revision as of 10:05, 9 March 2023
, 1 year agoImporting a new version from external source
=Adjustment on the device=
To teach the failsafe position simply set the throttle channel on your remote control to the desired position and press the button briefly. '''If you did not connect a function to [IO2] or [IO1] output and don't need throttle failsafe, press the button to complete setup anyway!'''<br />
<br />
[[File:Failsafe_setup.png|noframe|none|x180px]]<br />
<br />
{{WARNING_QUOTE|'''During failsafe setting the [IO2] or [IO1] output is enabled and can be controlled by the transmitter channel that is assigned to throttle function.''' This allows to check your throttle position in reality. When using electric models make sure the motor is disconnected from the ESC or the pinion is removed from the motor, so that it will not drive the model by accident.
}}<br />
<br />
To teach the failsafe position simply set the throttle channel on your remote control to the desired position and press the button briefly. '''If you did not connect a function to [IO2] or [IO1] output and don't need throttle failsafe, press the button to complete setup anyway!'''<br />
<br />
[[File:Failsafe_setup.png|noframe|none|x180px]]<br />
<br />
{{WARNING_QUOTE|'''During failsafe setting the [IO2] or [IO1] output is enabled and can be controlled by the transmitter channel that is assigned to throttle function.''' This allows to check your throttle position in reality. When using electric models make sure the motor is disconnected from the ESC or the pinion is removed from the motor, so that it will not drive the model by accident.
}}<br />
<br />