7,593
edits
Changes
Jump to navigation
Jump to search
Translations:Manuals:BXFbl:Radio Setup:SRXL2/10/en (view source)
Revision as of 14:27, 9 April 2024
, 2 months agoImporting a new version from external source
'''MICROBEAST ULTRA'''<br />
The ESC or throttle servo is connected at IO1 port. If needed the telemetry data line from the ESC is connected to the IO2 port.<br />
<br />
When using a SPEKTRUM® Avian ESC with SRXL2 telemetry this must be connected at SYS port. In consequence it is mandatory to connect the receiver at the DI2 port as shown above!<br />
<br />
The ESC or throttle servo is connected at IO1 port. If needed the telemetry data line from the ESC is connected to the IO2 port.<br />
<br />
When using a SPEKTRUM® Avian ESC with SRXL2 telemetry this must be connected at SYS port. In consequence it is mandatory to connect the receiver at the DI2 port as shown above!<br />
<br />