7,593
edits
Changes
Jump to navigation
Jump to search
Line 54:
Line 54: − + Line 64:
Line 64: − +
Updating to match new version of source page
Nachdem eine serielle Schnittstelle in der Auswahlbox angewählt wurde, wird der BEASTX Updater Classic versuchen, das Gerät zu erkennen.
Nachdem eine serielle Schnittstelle in der Auswahlbox angewählt wurde, wird der BEASTX Updater Classic versuchen, das Gerät zu erkennen.
If the MICROBEAST/Trajectory/AR7200BX was not connected at this moment you can manually force a new detection by pressing the "Refresh" button (or "Connect" when using the MicroSettings Software).
If the MICROBEAST/Trajectory/AR7200BX was not connected at this moment you can manually force a new detection by pressing the "Refresh" button.
If the correct COM-Port was chosen (red), and the MICROBEAST is connected to the USB2SYS-Interface, some information (green) of this MICROBEAST will be shown in the "BEASTX Device" section:
If the correct COM-Port was chosen (red), and the MICROBEAST is connected to the USB2SYS-Interface, some information (green) of this MICROBEAST will be shown in the "BEASTX Device" section:
* Hardware-Version 1.1 and 1.2 stand for MICROBEAST units. Hardware-Version 2.x shows that a MICROBEAST PLUS is connected. Hardware Version 8.0 identifies Spektrum AR7xxxBX units.
* Hardware-Version 1.1 and 1.2 stand for MICROBEAST units. Hardware-Version 2.x shows that a MICROBEAST PLUS is connected. Hardware Version 8.0 identifies Spektrum AR7xxxBX units.
* Application-Version is the actually installed firmware of the MICROBEAST (in this case 1.0.0).
* Application-Version is the actually installed firmware of the MICROBEAST (in this case 1.0.0).
* Data-Version is the format of the settings, stored on the MICROBEAST.
* Data-Version is the format that is used to store settings on the MICROBEAST.
* Serial-Number is a unique identifier for each MICROBEAST.
* Serial-Number is a unique identifier for each MICROBEAST.