Bureaucrats, Administrators, translate-proofr
16,261
edits
Changes
Jump to navigation
Jump to search
Line 55:
Line 55: + + + + + + + + + + + Line 71:
Line 82: − + − + − +
no edit summary
* To bind a DSMX satellite switch on the power supply now. The yellow LED '''A''' on the MICROBEAST PLUS will start to flash immediately. The receiver's yellow LED will start to flash as well. Now you can bind the transmitter as usual (for more information refer to the instructions of your radio control system).
* To bind a DSMX satellite switch on the power supply now. The yellow LED '''A''' on the MICROBEAST PLUS will start to flash immediately. The receiver's yellow LED will start to flash as well. Now you can bind the transmitter as usual (for more information refer to the instructions of your radio control system).
* After successful binding procedure the receiver‘s LED will stay solid. Then the device will restart and enter RECEIVER MENU if the current receiver type is not set to DSMX or will start with init sequence. Remove the bind plug and proceed.
* After successful binding procedure the receiver‘s LED will stay solid. Then the device will restart and enter RECEIVER MENU if the current receiver type is not set to DSMX or will start with init sequence. Remove the bind plug and proceed.
<br />
<br />
<gallery mode="nolines">
File:DSMXbind MB Plus 1.jpg|You need: RX, bind plug and battery
File:DSMXbind MB Plus 2.jpg|Connect bind plug at [SYS] and RX at [DI2]
File:DSMXbind MB Plus 3.jpg|Power up MICROBEAST: LEDs flash
File:DSMXbind MB Plus 4.jpg|Start bind sequence on radio
File:DSMXbind MB Plus 5.jpg|Bind successful
File:DSMXbind MB Plus 6.jpg|Proceed with setup
</gallery>
<br />
<br />
File:DSMXbind MB ULTRA 2.jpg|Connect bind plug at [AUX-PIT-RUD]
File:DSMXbind MB ULTRA 2.jpg|Connect bind plug at [AUX-PIT-RUD]
File:DSMXbind MB ULTRA 3.jpg|Power up MICROBEAST: LED A flashes
File:DSMXbind MB ULTRA 3.jpg|Power up MICROBEAST: LED A flashes
File:DSMXbind MB ULTRA 4.jpg|Connect your RX - it will also flash
File:DSMXbind MB ULTRA 4.jpg|Connect RX at [DI2] - it will also flash
File:DSMXbind MB ULTRA 5.jpg|Start bind sequence on radio
File:DSMXbind MB ULTRA 5.jpg|Start bind sequence on radio
File:DSMXbind MB ULTRA 6.jpg|Binding successful
File:DSMXbind MB ULTRA 6.jpg|Bind successful
File:DSMXbind MB ULTRA 7.jpg|RECEIVER MENU point A
File:DSMXbind MB ULTRA 7.jpg|Proceed with setup
</gallery>
</gallery>
<br />
<br />