Bureaucrats, Administrators, translate-proofr
16,261
edits
Changes
Jump to navigation
Jump to search
Line 17:
Line 17: − + Line 25:
Line 25: − + Line 43:
Line 43: − + Line 56:
Line 56: − + − + − Update-Files have the file-extension ".upd". Line 75:
Line 74: − +
no edit summary
The driver is inside the Disk-Image and must be installed manually.
The driver is inside the Disk-Image and must be installed manually.
===Validate driver installation (Windows only)===
===4. Validate driver installation (Windows only)===
After successful installation of the driver, when the USB2SYS-Interface is connected to the PC, you must be able to find following entry in the Windwos Device Manager:
After successful installation of the driver, when the USB2SYS-Interface is connected to the PC, you must be able to find following entry in the Windwos Device Manager:
Klicken Sie auf die Grafik für eine größere Ansicht Name: Step 4.png Hits: 1496 Größe: 47,1 KB ID: 598
Klicken Sie auf die Grafik für eine größere Ansicht Name: Step 4.png Hits: 1496 Größe: 47,1 KB ID: 598
To access the device manager under windows 7 type devmgmt.msc in the Startmenu's search bar. Alternatively you can enter the computer properties by pressing and holding the START key on the keyboard and addtionaly pressing the PAUSE key. Then click on device manager in the upper left corner of the appearing window.
To access the device manager under windows 7 type devmgmt.msc in the Startmenu's search bar. Alternatively you can enter the computer properties by pressing and holding the START key on the keyboard and addtionaly pressing the PAUSE key. Then click on device manager in the upper left corner of the appearing window.
===Start BEASTXUpdater===
===5. Start BEASTXUpdater===
IMPORTANT: The MICROBEAST will not be powered from the USB2SYS-Interface, so the MICROBEAST must be supplied with power from a different source BEFORE you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).
IMPORTANT: The MICROBEAST will not be powered from the USB2SYS-Interface, so the MICROBEAST must be supplied with power from a different source BEFORE you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).
Klicken Sie auf die Grafik für eine größere Ansicht Name: Step 5_4.jpg Hits: 437 Größe: 42,3 KB ID: 602
Klicken Sie auf die Grafik für eine größere Ansicht Name: Step 5_4.jpg Hits: 437 Größe: 42,3 KB ID: 602
===Detect connected BEASTX device===
===6. Detect connected BEASTX device===
After you selected a COM-Port the BEASTXUpdater will automatically try to identify the unit connected to it.
After you selected a COM-Port the BEASTXUpdater will automatically try to identify the unit connected to it.
Serial-Number is a unique identifier for each MICROBEAST.
Serial-Number is a unique identifier for each MICROBEAST.
===Select Update-File===
===7. Select Update-File===
If the MICROBEAST was successfully identified you can go on with selecting an Update-File. You can get the latest firmware at http://update.beastx.com/.
If the MICROBEAST was successfully identified you can go on with selecting an Update-File (if you still don't have a firmware update file have a look [[here]]).
"Open File…"Button opens a dialog where you can choose an Update-File.
"Open File…"Button opens a dialog where you can choose an Update-File.
IMPORTANT: If the major version of the "Data Version" is different between the actual and new firmware, then the Basic-Setup has to be done again after the update.
IMPORTANT: If the major version of the "Data Version" is different between the actual and new firmware, then the Basic-Setup has to be done again after the update.
===Perform Update===
===8. Perform Update===
If a valid COM-Port is selected an a valid Update-File was loaded, the "Start Update…" button will be enabled:
If a valid COM-Port is selected an a valid Update-File was loaded, the "Start Update…" button will be enabled:
Klicken Sie auf die Grafik für eine größere Ansicht Name: Step 8_1.jpg Hits: 475 Größe: 43,4 KB ID: 594
Klicken Sie auf die Grafik für eine größere Ansicht Name: Step 8_1.jpg Hits: 475 Größe: 43,4 KB ID: 594