Bureaucrats, Administrators, translate-proofr
16,261
edits
Changes
Jump to navigation
Jump to search
Created page with "<translate> Here you find a list of servo specifications so you can see what you have to adjust at MICROBEAST Setup menu points B,C and D. Please note that not all of these sp..."
<translate>
Here you find a list of servo specifications so you can see what you have to adjust at MICROBEAST Setup menu points B,C and D.
Please note that not all of these specifications have been tested and validated by BEASTX. Some have been directly taken from the manufacturer recommendations.
In relation to servo frequency note that the servos may overheat and get damaged if the frequency is set to high. Depending on height of supply voltage, servo load, vibration level and other factors it can happen that practically the frequency must not be set as high as "written on the paper". When a frequency is not "supported" by MICROBEAST simply use the lower frequency that is closest.
<br />
This site is still under construction, for the moment please refer to the old servo list on our BEASTX website: http://www.beastx.com/deu/servoliste.php
</translate>
<br />
<br />
'''ALIGN RC'''
{| border="1" cellpadding="2" cellspacing="1"
!align="left"|Type
!align="left"|max. Frequency
|-
|BL 700H
|200Hz
|-
|BL 750H
|333Hz
|-
|DS 410
|65Hz
|-
|DS 415M
|333Hz
|-
|DS 420
|333Hz
|-
|DS 425M
|333Hz
|}
Here you find a list of servo specifications so you can see what you have to adjust at MICROBEAST Setup menu points B,C and D.
Please note that not all of these specifications have been tested and validated by BEASTX. Some have been directly taken from the manufacturer recommendations.
In relation to servo frequency note that the servos may overheat and get damaged if the frequency is set to high. Depending on height of supply voltage, servo load, vibration level and other factors it can happen that practically the frequency must not be set as high as "written on the paper". When a frequency is not "supported" by MICROBEAST simply use the lower frequency that is closest.
<br />
This site is still under construction, for the moment please refer to the old servo list on our BEASTX website: http://www.beastx.com/deu/servoliste.php
</translate>
<br />
<br />
'''ALIGN RC'''
{| border="1" cellpadding="2" cellspacing="1"
!align="left"|Type
!align="left"|max. Frequency
|-
|BL 700H
|200Hz
|-
|BL 750H
|333Hz
|-
|DS 410
|65Hz
|-
|DS 415M
|333Hz
|-
|DS 420
|333Hz
|-
|DS 425M
|333Hz
|}