In relation to servo frequency note that the servos may overheat and get damaged if the frequency is set to high. Depending on height of supply voltage, servo load, vibration level and other factors it can happen that practically the frequency must not be set as high as "written on the paper". When a frequency is not "supported" by MICROBEAST simply use the lower frequency that is closest. | In relation to servo frequency note that the servos may overheat and get damaged if the frequency is set to high. Depending on height of supply voltage, servo load, vibration level and other factors it can happen that practically the frequency must not be set as high as "written on the paper". When a frequency is not "supported" by MICROBEAST simply use the lower frequency that is closest. |