7,543
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + + + + + + + + + + +
Translations:Manuals:MB Plus:Receiver Installation/2/en (view source)
Revision as of 09:05, 19 May 2015
, 9 years agoImporting a new version from external source
===Standard receivers===
===Standard receivers===
A standard receiver is a receiver that is connected to MICROBEAST PLUS by using any single servo output of the receiver to connect the five control channels between MICROBEAST PLUS and receiver. The channel which determines the controlled function simply is selected by inserting each plug to the correct output at the receiver.
A standard receiver is a receiver that is connected to MICROBEAST PLUS by using the single servo outputs of the receiver and connect them to the five control channels of MICROBEAST PLUS. The channel which determines the controlled function simply is selected by inserting each plug to the correct output at the receiver.<br />
<br />
<gallery widths=300px>
Image:Standard_RX.png
Image:Spektrum_RX.png
Image:Futaba_RX.png
</gallery>
The designation Spektrum®/Futaba® is only exemplary. You can use any radio system with at least 6 output channels to connect to MICROBEAST PLUS. For finding out how to connect the wires to MICROBEAST PLUS have a look at your radio's servo monitor and refer to the radio's instruction manual.<br />
<br />
{{QUOTE|[[Image:Warning.png|18px|sub]] Ensure a tight fit of the connectors. The pin board of MICROBEAST PLUS is designed so that the plugs firmly clamp each other when they are fully inserted. Anyhow, especially when using a single-line receiver, it is possible that connectors are plugged in with no adjacent neighbors. Such plugs should additionally be secured against loosening.}}<br />
<br />