Changes

== Connecting the RX2SIM Multi-Sim Adapter ==

== Connecting the RX2SIM Multi-Sim Adapter ==

The RX2SIM either can be used as USB2SYS interface emulator to connect your BEASTX device (MICROBEAST / SPEKTRUM AR7xxxBX) to StudioX but you can also directly connect the RX2SIM to StudioX and control it as Stand-Alone device. For this you push and hold the button on the RX2SIM before and while connecting it to the computer so it will start in booloader mode (also see RX2SIM manual). Then in StudioX the RX2SIM Plugin will be opened as soon as StudioX recognizes the RX2SIM.<br />

When RX2SIM is used as USB2SYS interface emulator to connect your BEASTX device (MICROBEAST / SPEKTRUM AR7xxxBX) as mentioned above, StudioX will not recognize the RX2SIM itself. To control it with StudioX as Stand-Alone device, i.e. for updating the firmware you must push and hold the button on the RX2SIM before and while connecting it to the computer. Then it will start in bootloader mode and StudioX will open the RX2SIM Plugin.<br />

<br />

<br />

<br />

<br />