− | When using an iOS or Android smartphone/tablet you can configure the BLE2SYS device by tapping the BLE2SYS button on top of the main window. This will open a configuration screen (or you will be asked to enter the pin code for the bluetooth device first). Also you can configure your BLE2SYS by the help of a PC/mac. In this case you have to connect the BLE2SYS to a USB2SYS computer interface using a Y-harness and powering with a receiver battery over the second line (as shown [[StudioXm/en|earlier]]). Then just click "Connect" and open the com port as you would connect to a BEASTX gyro.<br />
| + | Tippe zum Konfigurieren des BLE2SYS Interface unter iOS/Android in der Hauptübersicht oben auf den BLE2SYS Knopf. Die Konfigurationsseite sollte dann erscheinen (ggf. wirst Du vorher noch nach der Eingabe des Pin Codes gefragt). Mit einem PC/mac lässt sich das BLE2SYS ebenfalls konfigurieren. Hierzu benötigst Du aber zusätzlich das USB2SYS Computer Interface, an das Du das BLE2SYS mittels Y-Kabel ansteckst. An die zweite Leitung musst Du dann noch eine Stromversorgung anstecken (wie [[StudioXm/de|zuvor]] schon gezeigt). Dann klickst Du in der Hauptübersicht einfach auf "Verbinden" um die Schnittstelle zu öffnen, so als würdest Du die Verbindung zu einem BEASTX Kreiselsystem herstellen.<br /> |