7,227
edits
Changes
Jump to navigation
Jump to search
Line 10:
Line 10: − <br /> − '''Note that during initialization pressing the button has no significant effect and you will not be able to enter any menu.'''<br />
Importing a new version from external source
= BEASTX flybarless system =
= BEASTX flybarless system =
When connection to your BEASTX device is established wait until the data is loaded from the device and initialization sequence is finished. At first the system will calibrate to the radio system, Menu LEDs H to N will cycle up and down at the device (MICROBEAST PLUS/AR7210BX) and you can read "Radio init" in the opening overview screen. '''During this time do not move the sticks on your radio as the system is learning the stick mid positions.''' In the second step the device checks if the sensors are working correctly and learns the sensor rest positions. Here Menu LEDs A to G will cycle up and down (MICROBEAST PLUS/AR7210BX) and you can read "Sensor init" in the opening overview screen. '''During this time do not move the helicopter.''' When initialization is completed the Status LED will change to blue or purple color indicating the current gyro mode and you can read the gyro gain and mode in the app. If you can't get through the initialization sequence either because LEDs A-G or LEDs H-N don't stop cycling please read [[Help:FAQ:Powerup/en|the FAQ]] and do the CONTROL SETUP first.<br />
When connection to your BEASTX device is established wait until the data is loaded from the device and initialization sequence is finished. At first the system will calibrate to the radio system, Menu LEDs H to N will cycle up and down at the device (MICROBEAST PLUS/AR7210BX) and you can read "Radio init" in the opening overview screen. '''During this time do not move the sticks on your radio as the system is learning the stick mid positions.''' In the second step the device checks if the sensors are working correctly and learns the sensor rest positions. Here Menu LEDs A to G will cycle up and down (MICROBEAST PLUS/AR7210BX) and you can read "Sensor init" in the opening overview screen. '''During this time do not move the helicopter.''' When initialization is completed the Status LED will change to blue or purple color indicating the current gyro mode and you can read the gyro gain and mode in the app. If you can't get through the initialization sequence either because LEDs A-G or LEDs H-N don't stop cycling please read [[Help:FAQ:Powerup/en|the FAQ]] and do the CONTROL SETUP first.<br />
<br />
<br />
<br />
<br />