Changes

=Overview=

=Overview=

The StudioX plugin for MICROBEAST PLUS will be started when you connect your MICROBEAST PLUS/MICROBEAST PLUS HD to StudioX. Please note that functionality might be limited to just updating your device if the firmware version of the device is lower than version 3.1.3. In this case you might consider updating the device.<br />

The StudioX plug-in for MICROBEAST PLUS will be started when you connect your MICROBEAST PLUS/MICROBEAST PLUS HD to StudioX. Please note that functionality might be limited to just updating your device if the firmware version of the device is lower than version 3.2.0. In this case you might consider updating the device.<br />

<br />

<br />

<br />

<br />

=Advanced plugin configuration=

=Advanced plug-in configuration=

From the StudioX main menu, open "Edit" then "Configure plugins..." to show the plugin Configuration dialog.<br />

From the StudioX main menu, open "Edit" then "Configure plug-ins..." to show the plug-in Configuration dialog.<br />

Select "MICROBEAST PLUS" from the list:<br />

Select "MICROBEAST PLUS" from the list:<br />

<br />

<br />

[[File:Mb_config_dlg.png|200px|thumb|none]]

[[File:Mb_config_dlg.png|200px|thumb|none]]

==Serial Port Control==

==Serial Port Control==

By default the MICROBEAST PLUS plugin will continuously try to query all serial interfaces (the USB2SYS/SPMA3030-Interface is a serial interface) to check if a MICROBEAST PLUS is connected somewhere.<br />

By default the MICROBEAST PLUS plug-in will continuously try to query all serial interfaces (the USB2SYS/SPMA3030-Interface is a serial interface) to check if a MICROBEAST PLUS is connected somewhere.<br />

Sometimes it is useful to limit the ports that the plugin is trying to query, i.e. in case a port is blocking the plugin. Therefore you can choose from one of the following options:

Sometimes it is useful to limit the ports that the plug-in is trying to query, i.e. in case a port is blocking the plug-in. Therefore you can choose from one of the following options:

* Use all ports, except those selected  

* Use all ports, except those selected  

* Only use selected ports

* Only use selected ports

Use the entries in the list below to refine your selection. The plugin will only try to query ports which match the selected rule.<br />

Use the entries in the list below to refine your selection. The plug-in will only try to query ports which match the selected rule.<br />

==Device Discovery==

==Device Discovery==

This specifies the interval time which is used to try identifying newly connected devices. This should not be modified if the mechanism is working properly.<br />

This specifies the interval time which is used to try identifying newly connected devices. This should not be modified if the mechanism is working properly.<br />

<br />

<br />