Template:TOC MBPlusV5

From BEASTX Wiki
Revision as of 20:06, 8 April 2022 by Shornstein (talk | contribs)
Jump to navigation Jump to search

{{#if: |MICROBEAST PLUS V5.{{{4}}}

[[Manuals:MBPlusFblV5{{{4}}}:Intro/en|1. Introduction]]

[[Manuals:MBPlusFblV5{{{4}}}:Safety/en|2. Safety notes]]

[[Manuals:MBPlusFblV5{{{4}}}:Box_Content/en|3. Box content and accessories]]

[[Manuals:MBPlusFblV5{{{4}}}:Hardware_Installation/en|4. Hardware installation]]

[[Manuals:MBPlusFblV5{{{4}}}:Radio_System/en|5. Receiver connection]]

[[Manuals:MBPlusFblV5{{{4}}}:Radio_Setup/en|6. Radio system]]

[[Manuals:MBPlusFblV5{{{4}}}:ReceiverType/en|7. Receiver Menu]]
[[Manuals:MBPlusFblV5{{{4}}}:Receiver_A/en|Receiver type]]
[[Manuals:MBPlusFblV5{{{4}}}:Receiver_B/en|Function assignment]]
[[Manuals:MBPlusFblV5{{{4}}}:Receiver_M/en|Telemetry input]]
[[Manuals:MBPlusFblV5{{{4}}}:Receiver_N/en|Throttle failsafe]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_intro/en|8. Basic setup]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_A/en|Device orientation]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_B/en|Swashplate servos]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_C/en|Rudder pulse width]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_D/en|Rudder frequency]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_E/en|Rudder control]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_G/en|Swash mixing]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_H/en|Servo directions]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_I/en|Cyclic directions]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_J/en|Servo trim]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_K/en|Cyclic throw]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_L/en|Collective pitch]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_M/en|Servo limit]]
[[Manuals:MBPlusFblV5{{{4}}}:Governor/en|9. Headspeed Governor]]
[[Manuals:MBPlusFblV5{{{4}}}:Setupmenu_N/en|Activating the governor]]
[[Manuals:MBPlusFblV5{{{4}}}:Governormenu_A/en|Sensor test mode]]
[[Manuals:MBPlusFblV5{{{4}}}:Governormenu_B/en|Throttle low position]]
[[Manuals:MBPlusFblV5{{{4}}}:Governormenu_C/en|Throttle high position]]
[[Manuals:MBPlusFblV5{{{4}}}:Governormenu_D/en|Transmitter setup]]
[[Manuals:MBPlusFblV5{{{4}}}:Governormenu_E/en|Signal divider]]
[[Manuals:MBPlusFblV5{{{4}}}:Governormenu_F/en|Main gear ratio]]
10. Additional settings
[[Manuals:MBPlusFblV5{{{4}}}:Quicktrim/en|Trimming]]
[[Manuals:MBPlusFblV5{{{4}}}:ControlStyle/en|Control style]]
[[Manuals:MBPlusFblV5{{{4}}}:Parametermenu/en|Special parameters]]
[[Manuals:MBPlusFblV5{{{4}}}:Gains/en|Gains]]

[[Manuals:MBPlusFblV5{{{4}}}:AttitudeControl/en|11. AttitudeControl (Self leveling)]]

[[Manuals:MBPlusFblV5{{{4}}}:BankSwitch/en|12. Bank Switching]]

[[Manuals:MBPlusFblV5{{{4}}}:FactoryReset/en|13. Factory reset]]

[[Manuals:MBPlusFblV5{{{4}}}:VersionInfo/en|14. Version information]]

15. Firmware update

| MICROBEAST PLUS V5

1. Introduction

2. Box content and accessories

3. Hardware installation

4. Radio system

5. Receiver Menu

9. AttitudeControl (Self leveling)

10. Bank Switching

11. Factory reset

12. Version information

13. Firmware update

}}