Changes

The BEASTX servo list (view source)

Revision as of 08:31, 4 May 2015

169 bytes removed , 9 years ago

no edit summary

Line 3: Line 3:

Here you find a list of servo specifications so you can see what you have to adjust at MICROBEAST Setup menu points B,C and D. Please note that not all of these specifications have been tested and validated by BEASTX. Some have been directly taken from the manufacturer recommendations in accordance with the maximum specified frequency.

−

~~In relation to servo frequency note~~ that the servos may overheat and get damaged if the frequency is set to high.

+

{{QUOTE|[[Image:Warning.png|18px|sub]] '''Note that the servos may overheat and get damaged if the frequency is set to high!''' Depending on height of supply voltage, servo load, vibration level and other factors it can happen that practically the frequency must not be set as high as "written on the paper". When a frequency is not "supported" by MICROBEAST/MICROBEAST PLUS simply use the lower frequency that is closest.}}

−

Depending on height of supply voltage, servo load, vibration level and other factors it can happen that practically

−

the frequency must not be set as high as "written on the paper". When a frequency is not "supported" by MICROBEAST/

−

MICROBEAST PLUS simply use the lower frequency that is closest.

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr>

<tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

Line 37: Line 34:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr>

<tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

Line 75: Line 72:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr>

<tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

Line 104: Line 101:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr>

<tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

Line 121: Line 118:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Frequency</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length</td><td class="head_mid" colspan="2" align="center" nowrap="">Frequency</td></tr>

<tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

Line 130: Line 127:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td><td class="head_mid" colspan="2" align="center" nowrap="">Maximum frequency</td></tr>

<tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

Line 144: Line 141:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr><tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

<tr><td rowspan="19" align="center" nowrap="" valign="top">MKS Servo-tech</td><td class="field_mid" align="center" nowrap="">BLS-950</td><td class="field_blue" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">200</td><td class="field_blue" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">1520</td><td class="field_blue_bl" align="center" nowrap="">flashing blue</td><td class="field_mid" align="center" nowrap="">333</td></tr>

Line 169: Line 166:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr><tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

<tr><td rowspan="4" align="center" nowrap="" valign="top">Outrage TORQ</td><td class="field_mid" align="center" nowrap="">BL 9080 HV</td><td class="field_blue" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">200</td><td class="field_blue" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">1520</td><td class="field_red_bl" align="center" nowrap="">flashing red</td><td class="field_mid" align="center" nowrap="">165</td></tr>

Line 179: Line 176:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr><tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

<tr><td rowspan="8" align="center" nowrap="" valign="top">robbe</td><td class="field_mid" align="center" nowrap="">FS 550</td><td class="field_vio" align="center" nowrap="">purple</td><td class="field_mid" align="center" nowrap="">50</td><td class="field_blue" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">1520</td><td class="field_vio" align="center" nowrap="">purple</td><td class="field_mid" align="center" nowrap="">50</td></tr>

Line 193: Line 190:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr><tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

<tr><td rowspan="18" align="center" nowrap="" valign="top">Savöx</td><td class="field_mid" align="center" nowrap="">SB-2271SG</td><td class="field_blue" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">200</td><td class="field_blue" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">1520</td><td class="field_blue_bl" align="center" nowrap="">flashing blue</td><td class="field_mid" align="center" nowrap="">333</td></tr>

Line 217: Line 214:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr><tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

<tr><td rowspan="7" align="center" nowrap="" valign="top">Spektrum</td><td class="field_mid" align="center" nowrap="">SPMSH3000</td><td class="field_red_bl" align="center" nowrap="">flashing red</td><td class="field_mid" align="center" nowrap="">65</td><td class="field_blue" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">1520</td><td class="field_vio" align="center" nowrap="">purple</td><td class="field_mid" align="center" nowrap="">50</td></tr>

Line 230: Line 227:

−

<table class="tabs~~" align="center~~" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

+

<table class="tabs" cellpadding="5" cellspacing="0" width="60%" border="1"><tr><td class="head_def" rowspan="3" align="center" nowrap="">Manufacturer</td><td class="head_mid" rowspan="3" align="center" nowrap="">Type</td></tr>

<tr><td class="head_mid" colspan="2" align="center" nowrap="">Swashplate frequency (Setup menu B)</td><td class="head_mid" colspan="2" align="center" nowrap="">Pulse length (Setup menu C)</td><td class="head_mid" colspan="2" align="center" nowrap="">Rudder frequency (Setup menu D)</td></tr><tr><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">µs</td><td class="head_mid" align="center" nowrap="">Status LED</td><td class="head_mid" align="center" nowrap="">Hz</td></tr>

<tr><td rowspan="7" align="center" nowrap="" valign="top">XServo (BEASTX)</td><td class="field_mid" align="center" nowrap="">950 BL HV</td><td class="field_red_bl" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">200</td><td class="field_blue" align="center" nowrap="">blue</td><td class="field_mid" align="center" nowrap="">1520</td><td class="field_vio" align="center" nowrap="">flashing red</td><td class="field_mid" align="center" nowrap="">165</td></tr>

Shornstein

Bureaucrats, Administrators, translate-proofr

15,683

edits

Changes

The BEASTX servo list (view source)

Revision as of 08:31, 4 May 2015

Navigation menu

Search