Difference between revisions of "The brand new MICROBEAST only shows a red flashing LED or even nothing. What's wrong?"
Jump to navigation
Jump to search
Shornstein (talk | contribs) (Created page with "Check very carefully whether all cables are plugged in correctly and all the plugs are connected properly at the correct position (Beast & receiver!) - especially in the verti...") |
Shornstein (talk | contribs) |
||
Line 1: | Line 1: | ||
− | Check very carefully whether all cables are plugged in correctly and all the plugs are connected properly at the correct position (Beast & receiver!) | + | Check very carefully whether all cables are plugged in correctly and all the plugs are connected properly at the correct position (Beast & receiver!). Especially in the vertical direction, not just 2 pins must sit on the header. Also make sure that the polarity is correct on all connections. |
Latest revision as of 13:35, 16 December 2013
Check very carefully whether all cables are plugged in correctly and all the plugs are connected properly at the correct position (Beast & receiver!). Especially in the vertical direction, not just 2 pins must sit on the header. Also make sure that the polarity is correct on all connections.