Translations:Help:FAQ:Inflight/3/en

From BEASTX Wiki
Jump to navigation Jump to search

The gyro sensors do not seem to work correctly.

The rudder servo does not react or reacts very slowly to rotation of the helicopter.

  • Maybe the gain of tail gyro is too low. Check assignment of gain channel and adjust the gain in the transmitter as described in the manual.
  • Additionally when the elevator doesn't seem to work either, maybe the wrong mounting orientation has been selected. So select the correct mounting orientation in Setup menu point A.


Please note: With AR7210BX and firmware version 4.x.x or greater the setting of device orientation has changed compared to older devices/firmware and there are more options now. Do not use the same LED color as before as it is very likely this will be wrong. READ THE MANUAL!


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:FAQ:Inflight/3/en&oldid=15079"