Translations:Help:FAQ:Powerup/4/en
Jump to navigation
Jump to search
Status LED is flashing RED/BLUE after finishing init sequence
When Microbeast is flashing red-blue after start up, the throttle channel is in wrong position. For safety reason the throttle will be locked until throttle is moved to stop position on the radio. If throttle is in stop position already, check and set throttle lock position (=Failsafe position) at RECEIVER MENU point N.
Note that you can disable throttle locking mechanism if needed, i.e. for programming your ESC. This can be done at SETUP MENU point N (=Governor mode).