Translations:Manuals:AR7210FblV5:Governormenu F/3/en
Jump to navigation
Jump to search
| Menu point G Status-LED |
.YZ | Menu point H Status-LED |
|---|---|---|
| purple flashing | .00 | purple flashing |
| purple flashing | .05 | purple |
| purple flashing | .10 | red flashing |
| purple flashing | .15 | red |
| purple | .20 | purple flashing |
| purple | .25 | purple |
| purple | .30 | red flashing |
| purple | .35 | red |
| red flashing | .40 | purple flashing |
| red flashing | .45 | purple |
| red flashing | .50 | red flashing |
| red flashing | .55 | red |
| red | .60 | purple flashing |
| red | .65 | purple |
| red | .70 | red flashing |
| red | .75 | red |
| blue flashing | .80 | purple flashing |
| blue flashing | .85 | purple |
| blue flashing | .90 | red flashing |
| blue flashing | .95 | red |
When a custom gear ratio was set using StudioX or StudioXm the Status LED will be off at menu point F. Pressing the button briefly in this combination the menu points G and H will be skipped and you will directly exit the menu. Other than that also here you can change the gear ratio with the rudder stick and use one of the preset ratios, but note that in this case the custom ratio will be erased!