Translations:Manuals:BXFbl:BankSwitch/7/en

Setting up Bank Switching with StudioX Flow

Once StudioX Flow has connected to your BEASTX System, click the Parameter button on the overview screen. In the parameter view, click the "Next" (->) button repeatedly until you reach the Bank 1 - Gains screen, or go directly to this screen using the selection box at the top. Here you can activate Bank Switching by clicking the corresponding button above the gain adjustments. Once Bank Switching is activated, the following screens become accessible and can be used to change the parameters for Banks 2 & 3, in addition to the Bank 1 parameters set initially.

Please note that the "Quick Trim" screen has a global effect, meaning the values are used across all banks. Separate trimming for each bank is not provided.

If you have set a separate control channel for the AttitudeControl function in the Control setup menu, the gain adjustment for AttitudeControl in the app will have no effect - you can then only use Bank Switching to change between different rescue modes in flight, and the gain is not adjustable via the app. On the other hand, if you have not assigned a separate channel for AttitudeControl, you can set the AttitudeControl gain for each bank/flight mode and use the banks/flight modes to activate/deactivate the rescue function in flight. Note that AttitudeControl activates once the gain is higher than 12! Check the status display on the device overview main screen, or (on Microbeast Plus/Ultra) the device's LED display, to see whether AttitudeControl is active and what gain is set.