Translations:Manuals:BXFbl:Radio Setup:RemoteSat/25/en

From BEASTX Wiki
Jump to navigation Jump to search

MICROBEAST ULTRA

  • Insert a Spektrum® Bind Plug at the [AUX|PIT|RUD] port.
  • Disconnect(!) the Spektrum® remote satellite
  • To bind a DSMX satellite switch on the power supply now. The yellow LED A on the MICROBEAST ULTRA will start to flash. Now connect your remote satellite to the pin board. The receiver's yellow LED will start to flash as well. Now you can bind the transmitter as usual (for more information refer to the instructions of your radio control system).
  • After successful binding procedure the receiver‘s LED will stay solid. Then the device will restart and enter RECEIVER MENU if the current receiver type is not set to DSMX or will start with init sequence. Remove the bind plug and proceed.



Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Radio_Setup:RemoteSat/25/en&oldid=23555"