Translations:Manuals:BXFbl:Receiver M/20/en

From BEASTX Wiki
Jump to navigation Jump to search

OMP 65A ESC

Connect the control wire of your OMP ESC to port [IO1] / [DI1]. Connect the pin labeled with "TX" from the ESC to the port [CH5] / [IO2] using a single servo wire with plugs on both sides. Optionaly you can connect the yellow wire for measuring the motor speed to the [RPM] input at MICROBEAST PLUS / ULTRA, so that it is out of the way. For telemetry transmission it is not needed as the data will be included in the telemetry signal!

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Receiver_M/20/en&oldid=25000"