Translations:Manuals:BXFbl:Receiver M/32/en

To connect MICROBEAST PLUS / ULTRA with your JIVE PRO / KOSMIK ESC you need a special type of wire. You can get a ready to use solution from Kontronik® - Ordernr. 9703 (TELEMETRY CABLE JR). As shown below, the telemetry signal pin is the middle pin of the 5-pin connector. The most inner pin is common ground on JIVE Pro ESCs. On KOSMIK the pin next to the "LED side" is common ground. It is highly recommended to use a multimeter and check polarity before connecting your ESC to MICROBEAST PLUS / ULTRA. Note that the pin on the opposite side carries +5V. Do not connect anything here!