Translations:Manuals:BXFbl:Setupmenu C/8/en

Notes: As mentioned mostly all servos run at 1500 to 1520 µs. So please use 1520µs center pulse if you don't know the pulse of your servo. Also if your servos is rated 1500, use the 1520 setting. It doesn't matter, practically it's the same.
Usually the pulse width will be printed on the servo housing or the packaging, if it's a special 760µs servo or 960µs servo. Or it will say something like "Super Special Rudder Servo".

Also you can find out pulse width easily by testing the different settings. A 1520µs servo will not run properly when using 760µs and vice versa. It will only run into one direction or it will not run at all and feel powerless.