Translations:Manuals:BXFbl:Setupmenu D/5/en

Setup with StudioX app

Choose a preset frequency by clicking one of the provided buttons for Menu Point D (Rudder servo update rate) or set a custom frequency by clicking the gear symbol and directly changing the value with the dial or buttons. Using a custom frequency you can go up to 400 Hz frame rate for rudder servos with standard pulse width of 1500/1520µs. Usually this is plenty enough even for the fastest servos on the market. Going higher is not possible due to technical reasons (the servo pulse at maximum deflection would not fit into the frame properly!). If you want to get top notch performance, we recommend using a servo with 760 µs pulse width. This allows frequencies up to 600 Hz.

Choose a preset frequency ...

... or use the knob to adjust as needed.