Translations:Manuals:BXFbl:Setupmenu M/3/en
Jump to navigation
Jump to search
Adjustment on the device
- At SETUP MENU point M carefully move thrust, aileron/roll and elevator/pitch all at once and into all possible end positions and check if there is some point where the servos get jammed.
- By rudder stick input you can increase/decrease the amount of maximum servo throw/servo limit (left = decrease throw / right = increase throw).
- Make sure the throw is as high as possible.
- If you change the collective pitch at SETUP MENU point L at a later time, check and readjust the cyclic limit if necessary!