Latest revision as of 14:37, 17 December 2013
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Frequently Asked Questions )
(Please do not confuse: A slight tilt of the swash plate when the heli is standing on the ground is absolutely normal when the so-called integrators are not fully discharged. This only will happen after approx. 30 seconds without moving the helicopter or touching the sticks, then the swash returns to its normal position. This also depends on the position of the throttle stick - in the middle position is the discharge at the fastest. A bug in the above named manner is present when the swash moves downright by itself to full-stop also after correcting with the sticks and only cycling power off and on can resolve this problem.)
(Please do not confuse: A slight tilt of the swash plate when the heli is standing on the ground is absolutely normal when the so-called integrators are not fully discharged. This only will happen after approx. 30 seconds without moving the helicopter or touching the sticks, then the swash returns to its normal position. This also depends on the position of the throttle stick - in the middle position is the discharge at the fastest. A bug in the above named manner is present when the swash moves downright by itself to full-stop also after correcting with the sticks and only cycling power off and on can resolve this problem.) Translation (Please do not confuse: A slight tilt of the swash plate when the heli is standing on the ground is absolutely normal when the so-called integrators are not fully discharged. This only will happen after approx. 30 seconds without moving the helicopter or touching the sticks, then the swash returns to its normal position. This also depends on the position of the throttle stick - in the middle position is the discharge at the fastest. A bug in the above named manner is present when the swash moves downright by itself to full-stop also after correcting with the sticks and only cycling power off and on can resolve this problem.) (Please do not confuse: A slight tilt of the swash plate when the heli is standing on the ground is absolutely normal when the so-called integrators are not fully discharged. This only will happen after approx. 30 seconds without moving the helicopter or touching the sticks, then the swash returns to its normal position. This also depends on the position of the throttle stick - in the middle position is the discharge at the fastest. A bug in the above named manner is present when the swash moves downright by itself to full-stop also after correcting with the sticks and only cycling power off and on can resolve this problem.)